G-Tek® VR-X™: Seamless Knit Nylon Glove with Polyu

G-Tek® VR-X™

Seamless Knit Nylon Glove with Polyurethane Advanced Barrier Protection Coating on Full Hand – Touchscreen

33-VRX180

Color: Black

Description

Ideal for handling and assembly of small to medium sharp parts and materials, manufacturing, inspection, shipping and packaging and mechanical equipment maintenance and repair.

Seamless construction offers increased comfort and breathability
Nylon blended shell, featuring an ultra-thin 18 gauge liner for exceptional dexterity
VR-X Polyurethane coatings provide advanced barrier protection, the treated coating takes on the surface properties of the glove liner providing a tactile grip in wet, dry and slightly oily conditions, ideal for applications that require dexterity for precise handling
Liquid proof, air leak tested - EN374-2
Antibacterial and antiviral barrier protection per ISO 20743:2013 test method & EN374-5
ESD Safe, Surface Resistance per ESD S11.11 Static dissipative range at 10^8 ohms, 12%RH, 48hrs @100Volts
4.0 AQL, similar to the AQL levels for industrial grade disposable gloves
Touchscreen compatible to allow the user to operate a touch screen phone or device without removing gloves
Silicone free
Knit Wrist helps prevent dirt and debris from entering the glove
Color coded hems for easy size identification
Washable, resistant to water and ultraviolet light
Recommended wash cycle: maximum 6 cycles

Applications

Thin Coating, Good Grip for High Dexterity Handling
Small Parts Handling
Maintenance and Repair Operations
Quality Control and Inspection

Performance Data

X32

Puncture Level: 2
Test Method: ASTM F1342
Abrasion Level: 3
Test Method: ASTM D3389-10

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

Puncture Level: 2
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

California Proposition 65

WARNING: Cancer - www.P65Warnings.ca.gov

To see what chemicals included in the manufacturing of this product triggered the Prop 65 Warning please go to the Prop 65 Portal.

EN 388 2016 Results: 3111XX
Abrasion: 3Cut (Coupe Test): 1Tear: 1Puncture: 1Cut (TDM-100 Test): XImpact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Protective Gloves Against Micro-organisms

The EN ISO 374-5 VIRUS standard measures the ability of gloves to protect users against bacteria, fungi and viruses. Gloves with this marking must pass EN374-2 for leak testing.

FENTANYL PROTECTION
Test Method: ASTM D6978-05

In accordance with ASTM D6978-05, Personal Protective Equipment can be tested to ensure an effective barrier against Fentanyl. The ASTM D6978-05 Standard Practice for Assessment of Medical Gloves to Permeation by Chemotherapy Drug tests a breakthrough time of typically 240 minutes to determine if the PPE provides an effective barrier.

SKU & Packaging Information

SKU	Color	Size	UPC	Stock Type
33-VRX180/XS	Black	XS	616314373398	STOCK
33-VRX180/S	Black	S	616314373411	STOCK
33-VRX180/M	Black	M	616314373435	STOCK
33-VRX180/L	Black	L	616314373459	STOCK
33-VRX180/XL	Black	XL	616314373480	STOCK
33-VRX180/XXL	Black	2XL	616314373534	STOCK

Packaging: Pair Bagged Retail Ready
Packed: 12 Dozen/Case
Case Dimensions (in): 18.90 x 12.20 x 11.42
Case Weight (lbs): 17.64
Country of Origin: China

Documents & Downloads

North America

Europe

Asia & Pacific

North America

Europe

Asia & Pacific

G-Tek® VR-X™

Compare ()

ORDER SAMPLE

GET FIELD TRIAL