Building
Construction Safety

In building construction, workers face hazards from heavy lifting, power tools, confined spaces, and extreme weather. Our PPE, including reinforced gloves, protective workwear, and impact-resistant safety helmets, provides crucial protection, helping to reduce injuries and ensure safety on the job site.

Keeping Building Construction Workers Safe

In building construction, worker safety is paramount due to risks like heavy lifting, power tools, confined spaces, and extreme weather. Our PPE solutions are designed to address these challenges and provide maximum protection. Reinforced gloves and impact-resistant safety helmets shield workers from hand injuries and slips, trip and falls, while high-visibility clothing ensures that workers remain visible in high-traffic areas, reducing the risk of accidents. For those working in confined spaces or high elevations, our gear ensures safety from falls and impact hazards. To combat heat stress, we offer breathable clothing and hydration solutions that help keep workers cool and prevent heat-related illnesses, even in extreme conditions. With a focus on comfort, durability, and safety, our PPE ensures that workers are well-protected, reducing injury risks and maintaining productivity on building construction sites.

Straight forward solutions for complex hazards

Building construction sites can be minefields.

Building construction safety is about being aware of the hidden risks on the job site. Construction workers are 3 times more likely to be injured than those in other industries, and nearly 20% of all worker injuries happen in construction. It's imperative to know the potential risks and wear the right gear. By staying prepared and proactive, workers can stay safe while handling the tough challenges of the job. When it comes to head protection, why wouldn’t you want to take advantage of Type II safety helmets?

PIP® addresses challenges safety managers face with simple, innovative solutions.

Complete head-to-toe protection designed for versatility and performance
Consolidation by offering one solution for a wide range of hazards
Continuous training and resources for you and your team
Safety specialists and industry veterans that partner with you to encourage your team to invest in their own safety.

Kilimanjaro™ Type II Safety Helmet

Type II protection continues where Type I leaves off. Like Type I, Type II protects the top of the head from impact but also provides protection for the sides, back and front of the head – lateral impacts. The Kilimanjaro™ is a full brim Type II safety helmet with HDPE shell, 4-point textile suspension with wheel ratchet adjustment and 4-point chinstrap.

Learn More

Looking for a Complete Safety Solution for your Team?

Check out our picks for a complete head-to-toe safety outfit in building construction or contact Kerry Schimelfineg to have a conversation about putting together a custom solution for your facility.

Hand Protection

G-Tek® Paradox™

Seamless Knit PolyKor® Blended Glove with Foam Nitrile Coated Grip on Palm & Fingers - 21 Gauge - Touchscreen

16-351

Head Protection

PIP® Kilimanjaro™

Type II Full Brim Safety Helmet with HDPE Shell, 4-Point Textile Suspension, Wheel Ratchet Adjustment and 4-Point Chinstrap

280-HP642R-CH

Hearing Protection

Howard Leight™ Quiet®

Bell Shape Reusable PVC Ear Plugs - Dispenser Refill Pack- NRR 26

QD-1-DS

Safety Eyewear

UVEX® Avatar™ Plus

Semi-Rimless Safety Glasses with Black Frame, Clear Lens and Hydroshield® Coating

AS01CLHS

Respiratory Protection

North® 7700 Series

Half Mask, Silicone with Dual N-Series Cartridge Connectors

770030

Respiratory Protection Accessories

North®

P100 Filters (2/pk)

7580P100

Workwear Top

Bisley® Essentials

ANSI Type R Class 3 Women's Long Sleeve Shirt with Navy Bottom

313W6118T

Workwear Pants

Bisley® X-Airflow™

Women's Stretch Ripstop Vented Work Pants

411W6150

Footwear

PUMA® Safety

Conquest Wheat Womens CTX HIGH Composite Toe Impact Resistant Toe Cap, COA.TEX-Membrane, Electrical Hazard protection, Slip Resistant, Water Proof, Safety Boots

630565-407

Fall Protection

Miller® H500

Construction Comfort Full-Body Harness with 5 Points of Adjustment, Back D-Ring and Belt with Mating Chest Buckles & Tongue Leg Buckles

H5CC31100

First Aid

Fendall® 2000™

Sterile Eyewash Station

32-002000-0000

ASK THE EXPERT image of expert Kerry Schimelfenig

ASK THE EXPERT Kerry Schimelfenig - Business Development Manager, Construction

Kerry has over 20 years of expertise in the safety industry. He holds 20 industry-specific OSHA certifications, including Outreach Trainer credentials for both General Industry and Construction. He serves on the Executive Board of the ASSP – NEPA Chapter and is an Adjunct Instructor for the Mid Atlantic OSHA OTI at NCC and LCC colleges. He also participates on multiple ANSI/ASSP A10 committees.

As one of 200 PIP safety experts, Kerry helps standardize PPE to reduce costs, prevent injuries, and boost productivity.

Building Construction Hazards
- Falls - From heights, scaffolding, ladders, or unprotected edges.
- Struck-By Objects - Falling tools, materials, or machinery.
- Electrical Hazards - Contact with exposed wiring, electrical systems, or faulty equipment.
- Lifting and Handling Injuries - Strains or sprains from heavy lifting, repetitive tasks, or awkward postures.
- Trenching and Excavation Hazards - Cave-ins or being struck by equipment.
- Heat Stress - Working in hot conditions leads to dehydration, heat exhaustion, or heat stroke.
- Cold Stress - Working in cold conditions leading to frostbite, hypothermia, chilblains or trench foot.
- Noise Exposure - Prolonged exposure to loud machinery and equipment, leading to hearing damage.
- Hand Injuries - Cuts, bruises, or crush injuries from power tools, heavy materials, or machinery.
- Chemical Exposure - Handling or exposure to hazardous substances like adhesives, solvents, or asbestos.
- Respiratory Hazards - Inhalation of dust, fumes, or vapors from materials like concrete, paint, or insulation.
Industry Standards
OSHA 29 CFR 1926
OSHA's construction standards require employers to assess jobsite hazards and provide appropriate PPE at no cost to workers.
Key sections cover equipment for common construction risks such as falls, head injuries, hand and foot protection and electrical hazards:
- Subpart E:
  - 1926.95: General Requirements for PPE
  - 1926.96: Foot Protection
  - 1926.97: Electrical Protective Equipment
  - 1926.98: Hand Protection
  - 1926.99: Head Protection
  - 1926.52: Occupational Noise Exposure
- Subpart L:
  - 1926.451: Scaffolding Safety
  - 1926.1053: Ladder Safety PPE
- Subpart M:
  - 1926.500–503: Fall Protection
- Subpart D & I (Select Provisions):
  - 1926.300–302: PPE for Handling Hand and Power Tools
OSHA 29 CFR 1910
OSHA's general industry standards require employers to assess workplace hazards and provide suitable PPE at no cost to employees.
Specific sections cover various PPE types:
- Subpart I:
  - 1910.132: General Requirements for PPE
  - 1910.133: Eye and Face Protection
  - 1910.134: Respiratory Protection
  - 1910.135: Head Protection
  - 1910.136: Foot Protection
  - 1910.137: Electrical Protective Equipment
  - 1910.138: Hand Protection
- Subpart G:
  - 1910.95: Occupational Noise Exposure - Hearing Protection 
- Subpart Z:
  - 1910.1200: Hazard Communication (HazCom) - Chemical Protection
ANSI/ISEA Standards
- ANSI/ISEA Z89.1: Industrial head protection standards, including classifications for impact protection (Type I or Type II) and electrical resistance (Class G, E, or C)
- ANSI/ISEA 105: Classification of gloves based on cut, puncture, abrasion, and chemical resistance
- ANSI/ISEA 107: Standards for high-visibility safety apparel and accessories, categorized by performance class based on visibility needs
- ANSI/ISEA Z87.1: Eye and face protection from impact, dust, debris, and chemical splashes 
- ANSI/ASSP A10.50-2024: Standard is designed to provide comprehensive guidelines for managing heat stress in construction and demolition industries, though it can also be adapted for other outdoor work environments. It emphasizes key measures to protect workers from heat-related illnesses, which range from minor issues like heat rashes to severe conditions such as heat stroke.
- ANSI A14: Standards for ladder safety, including appropriate PPE use
- ANSI/ASA S12.6: Noise reduction ratings (NRR) for hearing protection devices
EN Standards
- EN 388: European standard for mechanical protection gloves
- EN 374: Standards for gloves resistant to chemicals and microorganisms
- EN 166: European standard for industrial eye protection
NIOSH Standards
- 42 CFR Part 84: NIOSH standard that defines the testing, performance and certification requirements for all types of respirators used in workplace settings

View Products

PIP® Traverse™

Vented, Industrial Climbing Helmet with Mips® Brain Protection System for Industrial Safety Helmets, ABS Shell, EPS Foam Impact Liner, HDPE Suspension, Wheel Ratchet Adjustment and 4-Point Chin Strap

280-HP1491RVM