LOGIN/ SIGN UP WHAT'S NEW Products Brands Industries Resources About Us Value Proposition PORTAL LOGIN
PRODUCTS CATEGORY
Arm Protection Cold Stress Controlled Environment Electrical Safety Emergency Responder Ergonomics Eye Protection Fall Protection First Aid Foot Protection Hand Protection Head Protection Hearing Protection Heat Stress Protective Clothing Respiratory Protection Warning Beacons Welding Protection Workwear
Arm ProtectionCut Resistant SleeveGeneral Duty SleeveMetal Mesh Sleeves
Cold StressHeated ApparelWarming
Controlled EnvironmentCE ApronCE Finger CotsCE GlovesCE MasksCE SuppliesReusable Clothing
Electrical SafetyArc AccessoriesArc ClothingArc Protection KitsElectrical Glove ProtectionElectrical Safety AccessoriesInsulating BlanketsInsulating Glove KitInsulating GlovesInsulating Sleeves
Emergency ResponderAccessories FR HoodsFire & Rescue GlovesFire & Rescue GoggleRescue Helmets
ErgonomicsErgonomic SupportsKnee Protection
Eye ProtectionFace ProtectionSafety Eyewear AccessoriesSafety GlassesSafety Goggles
Fall ProtectionTool Tethering
First AidAccessoriesFirst Aid Kit
Foot ProtectionOver-the-Shoe BootsOver-the-Sock BootsSafety Shoes
Hand ProtectionChemical Resistant GlovesCold Protection GlovesCut Resistant GlovesDisposable GlovesExtended Use Disposable GlovesFabric Work GlovesGeneral Purpose Gloves - CoatedGeneral Purpose Gloves - UncoatedHeat Protection GlovesHigh Performance GlovesLeather Drivers GlovesLeather Palm GlovesMetal Mesh GlovesParade & Uniform Gloves
Head ProtectionAccessoriesBump CapsFR HoodsGo-To-Work KitsHard HatsSafety HelmetsWinter Caps & Liners
Hearing ProtectionEar MuffsEar Plugs
Heat StressAbsorptiveEvaporative CoolingHydrationPhase Change CoolingSun Protection
Protective ClothingApronsCold Weather WearCut Resistant WearDisposable ClothingFR ClothingFace CoversHi-Vis ApparelHi-Vis Cold GearHoods & Paint CapsMetal Mesh ClothingRainwear
Respiratory ProtectionCartridgesDisposable MasksReusable Facepieces
Warning BeaconsEflare BeaconsFlash Baton
Welding ProtectionAccessoriesFR ClothingHand Protection
WorkwearWork Apparel
promo-tile

Hand Protection

promo-tile

Specialized PPE for ELECTRIC VEHICLE MANUFACTURING

promo-tile

INTERACTIVE CROSS REFERENCE

promo-tile

Addressing AR/FR Pain Points

promo-tile

Bouton® FogLess® 3Sixty™ Technology

promo-tile

UNRAVELING THE DYNAMICS OF ESD

promo-tile

G-Tek® D3O® Impact Glove Series

promo-tile

JSP Force Typhoon™ 8 Twin Filter Half Masks with PressToCheck™

promo-tile

PIP® Field Installable 4-Point Hard Hat Chin Strap Demo

promo-tile

BioSoft™ Sustainable Bio-Based Ear Plugs

promo-tile

PPE For Emergency Responders

promo-tile

ATA Fiber Technology Strength Meets Comfort

promo-tile

G-Tek® VRX™ ADVANCED PROTECTION

promo-tile

PPE For Emergency Responders

promo-tile

Heated Apparel For Cold Climates

promo-tile

INTERACTIVE CROSS REFERENCE

promo-tile

INTERACTIVE CROSS REFERENCE

promo-tile

Welding Garment Material Performance

promo-tile

Bisley X-Airflow™ Workwear Shirts

promo-tile

ON-SITE PPE ASSESSMENT

promo-tile

3 COMMON TYPES OF COLD STRESS And How You Can Prepare For Them

promo-tile

SUSTAINABLE SOLUTIONS IN PPE

promo-tile

PROTECTIVE SLEEVE BUYERS GUIDE

promo-tile

MULTI-TASK WELDERS GLOVES Offer The Protection And Dexterity Welders Need

promo-tile

ON-SITE PPE ASSESSMENT

promo-tile

SURVIVIVNG THE SUMMER HEAT A Guide to Workplace Safety and Hydration

promo-tile

HALF MASK RESPIRATORS REVOLUTIONARY FORCE TYPHOON™8

promo-tile

SUSTAINABLE SOLUTIONS IN PPE

promo-tile

4 HIDDEN JOBSITE RISKS And How To Avoid Them

promo-tile

Mips®HELMET SAFETY SYSTEM TECHNOLOGY

promo-tile

Bouton OpticalAdvanced Lens Technologies in Safety Eyewear™

promo-tile

What to Consider When Choosing HIGH VISIBILITY MULTI-SEASON WORKWEAR

promo-tile

6 Key Facts to Help Understand ARC FLASH RISKS

promo-tile

ON-SITE PPE ASSESSMENT

promo-tile

Head Protection

promo-tile

REUSABLE VS. DISPOSABLEUsing The Right Garment For The Right Job

promo-tile

Experience Barrier Protection and Flexibility With EXTENDED USE GLOVES

promo-tile

What is Double Hearing Protection And When Would You Need It?

promo-tile

CUSTOM LOGO SERVICES FAST, EASY & PRECISE

promo-tile

SUSTAINABLE SOLUTIONS IN PPE

promo-tile

WELDING SAFETY SELECTOR GUIDE

promo-tile

3SP ONLINE TRAINING

promo-tile

BisleyPREMIUM MULTI-SEASON WORKWEAR

promo-tile

Natural Disaster Relief PPE EXPECT THE UNEXPECTED

promo-tile

MADE-TO-ORDER SLEEVES Custom Options for Enhanced Performance

promo-tile

Enhancing Workplace Safety in the Construction Industry with MULTI-DIRECTIONAL HEAD PROTECTION TECHNOLOGY

promo-tile

ON-SITE PPE ASSESSMENT

promo-tile

THORZT™ RAPID REHYDRATIONFor the Industrial Athlete

promo-tile

Protective Clothing

promo-tile

BioSoft™ THE WORLD'S FIRST SUSTAINABLE BIO-BASED EAR PLUGS

promo-tile

NOVAX ELECTRICAL SAFETYNot All Gloves Are Created Equal

promo-tile

INTERACTIVE CROSS REFERENCE

promo-tile

CONTROLLED ENVIRONMENT SELECTOR GUIDE

promo-tile

3SP ONLINE TRAINING

promo-tile

3SP ONLINE TRAINING

promo-tile

EYE PROTECTION SELECTOR GUIDE

promo-tile

HAND PROTECTION SELECTOR GUIDE

Protect Your Arms

PIP offers the widest range of Seamless Cut-Resistant gloves and sleeves anywhere in the world. Our products are manufactured using a variety of yarns containing advanced fibers such as DuPont Kevlar® and Dyneema® as well as proprietary engineered yarns. Cut-Resistant products are extensively used in industrial, construction and food processing markets. The use of Cut-Resistant sleeves has increased considerably over the years as we've led with the introductions of new yarns and grips.

ARM PROTECTION

Cut Resistant Sleeve (43)

VIEW:
All
  • Description
  • Bullets
  • Icons
  • Hide All
CLEAR ALL
Cut Level A4
Rubber

Kut Gard®

AR/FR Single-Ply DuPont™ Kevlar® / Nomex® Xtreme Arc Cut Fiber Blended Sleeve

S13ARCGY/N4

  • PPE Category: 2
  • Cut Level: A4
  • ANSI Abrasion Level: 3
  • ANSI Contact Heat Level: 2
  • Liner Material: Kevlar
  • Top of Arm: Overstitched Elastic
  • Construction: Tube Knit
  • Size: 18
  • Packed: 72/Case
  • Stock Type: Stock
A43X
A43X

Cut Level: A4
Test Method: ASTM F2992-15

Abrasion Level: 3
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
ANSI Contact Heat Level: 2
Test Method: ASTM F1060-18
Temperature: 284°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

 
ATPV 15.2 Cal/cm2

The NFPA has identified the various FR hazardous risk category levels, which range from PPE 1 (which is low risk and requires AR clothing with a minimum arc rating of 4), up to PPE 4 (which is high risk and requires AR clothing with a minimum arc rating of 40). Each level, 1-4, is rated at a certain amount of flame resistance measured in cal/cm2.

P65
California Proposition 65
WARNING: Cancer - www.P65Warnings.ca.gov

To see what chemicals included in the manufacturing of this product triggered the Prop 65 Warning please go to the Prop 65 Portal.

Compare
1-Ply Tube Knit

Kut Gard®

ATA® / HPPE Blended Sleeve with Hook and Loop Closure with Thumb Hole

20-S13ATA/PE4-T-VEL

  • Cut Level: A4
  • ANSI Abrasion Level: 3
  • Ply: Single-Ply
  • Liner Material: ATA Fiber Technology/ HPPE
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Velcro Closure
  • Construction: Machine Knit
  • Sizes: 18"-22"
  • Packed: 144/Case
  • Stock Type: Stock
A432
A432

Cut Level: A4
Test Method: ASTM F2992-15

Puncture Level: 2
Test Method: ASTM F1342

Abrasion Level: 3
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 2
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Compare
1-Ply Tube Knit

Kut Gard®

ATA Technology, HPPE, 13 Gauge, ANSI A4 Sleeve with Top of Arm Hook and Loop Closure

20-S13ATA/PE4HVOTVEL

  • Cut Level: A4
  • ANSI Abrasion Level: 3
  • Ply: Single-Ply
  • Liner Material: ATA Fiber Technology/ HPPE
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Velcro Closure
  • Construction: Machine Knit
  • Sizes: 18"-22"
  • Packed: 144/Case
  • Stock Type: Stock
A432
A432

Cut Level: A4
Test Method: ASTM F2992-15

Puncture Level: 2
Test Method: ASTM F1342

Abrasion Level: 3
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 2
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Compare
2-Ply Cane Mesh

Kut Gard®

2-Ply Nylon Cane Mesh Sleeve - 9"

30-6795B

  • Cut Level: A4
  • ANSI Abrasion Level: 2
  • Ply: 2-Ply
  • Liner Material: Nylon Cane Mesh
  • Top of Arm: Velcro Closure
  • Construction: Cut-and-Sewn
  • Sizes: S-2XL
  • Packed: 72 Pair/Case
  • Stock Type: Stock
A42X
A42X

Cut Level: A4
Test Method: ASTM F2992-15

Abrasion Level: 2
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 2
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

Compare
1-Ply Machine Knit

Kut Gard®

Single-Ply ACP / DuPont™ Kevlar® Blended Sleeve with Smart-Fit® and Thumb Hole

10-21KVACPMBKTH

  • Cut Level: A4
  • ANSI Contact Heat Level: 2
  • Ply: Single-Ply
  • Liner Material: ACP/ Kevlar
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Plush Top Elastic
  • Construction: 2x1 Knit, Smart-Fit
  • Sizes: 18"-24"
  • Packed: 144/Case
  • Stock Type: Made to Order
A4XX
A4XX

Cut Level: A4
Test Method: ASTM F2992-15

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
ANSI Contact Heat Level: 2
Test Method: ASTM F1060-18
Temperature: 284°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Compare
1-Ply Machine Knit

Kut Gard®

Single-Ply ACP / DuPont™ Kevlar® / Pritex™ Blended Sleeve with Antimicrobial Fibers and Smart-Fit®

15-21KVBK

  • Cut Level: A4
  • Ply: Single-Ply
  • Liner Material: ACP/ Antimicrobial/ Kevlar/ Pritex
  • Top of Arm: Elastic Cuff
  • Construction: 2x1 Knit, Smart-Fit
  • Size: 18"
  • Packed: 144/Case
  • Stock Type: Stock
A4XX
A4XX

Cut Level: A4
Test Method: ASTM F2992-15

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Compare
1-Ply 2x2_5 Tube Knit

Claw Cover®

2-Ply ACP / Dyneema® Blended Sleeve

20-DA

  • Cut Level: A4
  • Ply: 2-Ply
  • Liner Material: ACP/ Dyneema
  • Top of Arm: Elastic Cuff
  • Construction: Seamless Knit
  • Sizes: 10"-24"
  • Packed: 144/Case
  • Stock Type: Stock
A4XX
A4XX

Cut Level: A4
Test Method: ASTM F2992-15

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Compare
1-Ply Tube Knit

Kut Gard®

ATA® / HPPE Blended Sleeve with Hook and Loop Closure

20-S13ATA/PE4-VEL

  • Cut Level: A4
  • ANSI Abrasion Level: 3
  • Ply: Single-Ply
  • Liner Material: ATA Fiber Technology/ HPPE
  • Top of Arm: Velcro Closure
  • Construction: Machine Knit
  • Sizes: 18"-22"
  • Packed: 144/Case
  • Stock Type: Stock
A432
A432

Cut Level: A4
Test Method: ASTM F2992-15

Puncture Level: 2
Test Method: ASTM F1342

Abrasion Level: 3
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 2
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Compare
PVC

Kut Gard®

AR/FR Single-Ply DuPont™ Kevlar® / Nomex® Xtreme Arc Cut Fiber Blended Sleeve with Thumb Hole

S13ARCGY/N4-T

  • PPE Category: 2
  • Cut Level: A4
  • ANSI Abrasion Level: 3
  • ANSI Contact Heat Level: 2
  • Ply: Single-Ply
  • Liner Material: Kevlar
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Overstitched Elastic
  • Construction: Tube Knit
  • Size: 18"
  • Packed: 72/Case
  • Stock Type: Stock
A43X
A43X

Cut Level: A4
Test Method: ASTM F2992-15

Abrasion Level: 3
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
ANSI Contact Heat Level: 2
Test Method: ASTM F1060-18
Temperature: 284°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

 
15.2 Cal/cm2

The NFPA has identified the various FR hazardous risk category levels, which range from PPE 1 (which is low risk and requires AR clothing with a minimum arc rating of 4), up to PPE 4 (which is high risk and requires AR clothing with a minimum arc rating of 40). Each level, 1-4, is rated at a certain amount of flame resistance measured in cal/cm2.

P65
California Proposition 65
WARNING: Cancer - www.P65Warnings.ca.gov

To see what chemicals included in the manufacturing of this product triggered the Prop 65 Warning please go to the Prop 65 Portal.

Compare
Rubber

Kut Gard®

Single-Ply ATA® / Sta-Cool™ Blended Sleeve

S10ATAFRCM/4-ES6

  • Cut Level: A4
  • ANSI Abrasion Level: 2
  • ANSI Contact Heat Level: 2
  • Ply: Single-Ply
  • Liner Material: ATA Fiber Technology/ Aramid/ Sta-Cool
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Non-Slip
  • Construction: Machine Knit, Seamless Knit
  • Sizes: 18"-22"
  • Packed: 72/Case
  • Stock Type: Stock
A42X
A42X

Cut Level: A4
Test Method: ASTM F2992-15

Abrasion Level: 2
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 2
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
ANSI Contact Heat Level: 2
Test Method: ASTM F1060-18
Temperature: 284°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Compare
1-Ply Machine Knit

Kut Gard®

Single-Ply ACP / DuPont™ Kevlar® Blended Sleeve with Smart-Fit®

10-21KVACPMBK

  • Cut Level: A4
  • ANSI Contact Heat Level: 2
  • Ply: Single-Ply
  • Liner Material: ACP/ Kevlar
  • Top of Arm: Plush Top Elastic
  • Construction: 2x1 Knit, Smart-Fit
  • Sizes: 18"-22"
  • Packed: 144/Case
  • Stock Type: Made to Order
A4XX
A4XX

Cut Level: A4
Test Method: ASTM F2992-15

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
ANSI Contact Heat Level: 2
Test Method: ASTM F1060-18
Temperature: 284°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Compare
1-Ply Machine Knit

Kut Gard®

ATA®/ HPPE Blended Sleeve with Thumb Hole

20-S13ATA/PE4-T

  • Cut Level: A4
  • ANSI Abrasion Level: 3
  • Ply: Single-Ply
  • Liner Material: ATA Fiber Technology/ HPPE
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Overstitched Elastic
  • Construction: Machine Knit
  • Sizes: 18"-20"
  • Packed: 144/Case
  • Stock Type: Stock
    Additional items available for Made-to-Order (MTO) include 20-S13ATA/PE4-20T
A432
A432

Cut Level: A4
Test Method: ASTM F2992-15

Puncture Level: 2
Test Method: ASTM F1342

Abrasion Level: 3
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 2
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Compare
2-Ply Tube Knit

Kut Gard®

Single-Ply ACP / Dyneema® Blended Sleeve with Smart-Fit® and Thumb Hole

20-21DACPBPTH

  • Cut Level: A4
  • ANSI Abrasion Level: 1
  • Ply: Single-Ply
  • Liner Material: ACP/ Dyneema
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Elastic Cuff
  • Construction: 2x1 Knit, Smart-Fit
  • Sizes: 14"-18"
  • Packed: 144/Case
  • Stock Type: Made to Order
A41X
A41X

Cut Level: A4
Test Method: ASTM F2992-15

Abrasion Level: 1
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 1
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

Compare
1-Ply Tube Knit

Kut Gard®

ATA®/ HPPE Blended Sleeve

20-S13ATA/PE4

  • Cut Level: A4
  • ANSI Abrasion Level: 3
  • Ply: Single-Ply
  • Liner Material: ATA Fiber Technology/ HPPE
  • Top of Arm: Overstitched Elastic
  • Construction: Machine Knit
  • Size: 18"
  • Packed: 144/Case
  • Stock Type: Stock
    Additional items available for Made-to-Order (MTO) include 20-S13ATA/PE4-22
A432
A432

Cut Level: A4
Test Method: ASTM F2992-15

Puncture Level: 2
Test Method: ASTM F1342

Abrasion Level: 3
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 2
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Compare
Rubber

Kut Gard®

Single-Ply ATA® / Hide-Away™ FR Blended Sleeve with Thumb Hole

S13ATAFR/4HA-ES6-T

  • Cut Level: A4
  • ANSI Abrasion Level: 1
  • ANSI Contact Heat Level: 2
  • Ply: Single-Ply
  • Liner Material: Aramid/ ATA Fiber Technology/ Stainless Steel Wire
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Non-Slip
  • Construction: Machine Knit, Seamless Knit
  • Sizes: 18"-22"
  • Packed: 72/Case
  • Stock Type: Stock
A41X
A41X

Cut Level: A4
Test Method: ASTM F2992-15

Abrasion Level: 1
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 1
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
ANSI Contact Heat Level: 2
Test Method: ASTM F1060-18
Temperature: 284°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Compare
1-Ply 2x2_5 Tube Knit

Kut Gard®

2-Ply ACP / Dyneema® Blended Sleeve with Thumb Hole

20-DATO

  • Cut Level: A4
  • Ply: 2-Ply
  • Liner Material: ACP/ Dyneema
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Elastic Cuff
  • Construction: Seamless Knit
  • Size: 18"
  • Packed: 144/Case
  • Stock Type: Stock
A4XX
A4XX

Cut Level: A4
Test Method: ASTM F2992-15

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Compare
1-Ply Machine Knit

Kut Gard®

Single-Ply ACP / DuPont™ Kevlar® Blended Sleeve with Smart-Fit® and Elastic Thumb

10-21KVACPMBK-ET

  • Cut Level: A4
  • ANSI Contact Heat Level: 2
  • Ply: Single-Ply
  • Liner Material: ACP/ Kevlar
  • Finger & Thumb: Elastic Thumb
  • Top of Arm: Plush Top Elastic
  • Construction: 2x1 Knit, Smart-Fit
  • Size: 18"
  • Packed: 144/Case
  • Stock Type: Made to Order
A4XX
A4XX

Cut Level: A4
Test Method: ASTM F2992-15

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
ANSI Contact Heat Level: 2
Test Method: ASTM F1060-18
Temperature: 284°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Compare
1-Ply Tube Knit

Kut Gard®

ATA Technology, HPPE, 13 Gauge, ANSI A4 Sleeve with Top of Arm Hook and Loop Closure

20-S13ATA/PE4HVO-VEL

  • Cut Level: A4
  • ANSI Abrasion Level: 3
  • Ply: Single-Ply
  • Liner Material: ATA Fiber Technology/ HPPE
  • Top of Arm: Velcro Closure
  • Construction: Machine Knit
  • Sizes: 18"-22"
  • Packed: 144/Case
  • Stock Type: Stock
A432
A432

Cut Level: A4
Test Method: ASTM F2992-15

Puncture Level: 2
Test Method: ASTM F1342

Abrasion Level: 3
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 2
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Compare
1-Ply Smart Fit

Kut Gard®

Single-Ply ACP / DuPont™ Kevlar® / Pritex™ Blended Sleeve with Antimicrobial Fibers, Smart-Fit® and Elastic Thumb

15-21KVBK-ET

  • Cut Level: A4
  • Ply: Single-Ply
  • Liner Material: ACP/ Antimicrobial/ Kevlar/ Pritex
  • Finger & Thumb: Elastic Thumb
  • Top of Arm: Elastic Cuff
  • Construction: 2x1 Knit, Smart-Fit
  • Size: 18"
  • Packed: 144/Case
  • Stock Type: Made to Order
A4XX
A4XX

Cut Level: A4
Test Method: ASTM F2992-15

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Compare
Rubber

Kut Gard®

2-Ply Nylon Cane Mesh Sleeve - 9"

30-6795W

  • Cut Level: A4
  • ANSI Abrasion Level: 2
  • Ply: 2-Ply
  • Liner Material: Nylon Cane Mesh
  • Top of Arm: Velcro Closure
  • Construction: Cut-and-Sewn
  • Sizes: S-2XL
  • Packed: 72 Pair/Case
  • Stock Type: Stock
A42X
A42X

Cut Level: A4
Test Method: ASTM F2992-15

Abrasion Level: 2
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 2
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

Compare
Rubber

Kut Gard®

Single-Ply ATA® / Sta-Cool™ Blended Sleeve with Thumb Hole

S10ATAFRCM/4-ES6-T

  • Cut Level: A4
  • ANSI Abrasion Level: 2
  • ANSI Contact Heat Level: 2
  • Ply: Single-Ply
  • Liner Material: ATA Fiber Technology/ Aramid/ Sta-Cool
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Non-Slip
  • Construction: Machine Knit, Seamless Knit
  • Sizes: 18"-22"
  • Packed: 72/Case
  • Stock Type: Stock
A42X
A42X

Cut Level: A4
Test Method: ASTM F2992-15

Abrasion Level: 2
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 2
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
ANSI Contact Heat Level: 2
Test Method: ASTM F1060-18
Temperature: 284°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Compare
2-Ply Tube Knit

Kut Gard®

2-Ply ATA® Blended Sleeve with Sta-COOL™ Liner with Thumb Hole

MSATACM2X2.5-T

  • Cut Level: A4
  • ANSI Abrasion Level: 1
  • Ply: 2-Ply
  • Liner Material: HPPE/ Stainless Steel Wire/ Sta-Cool
  • Top of Arm: Elastic Cuff
  • Construction: Seamless Knit
  • Sizes: 14"-24"
  • Packed: 200/Case
  • Stock Type: Made to Order
A41X
A41X

Cut Level: A4
Test Method: ASTM F2992-15

Abrasion Level: 1
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 1
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

Compare
1-Ply Smart Fit

Kut Gard®

Single-Ply ACP / Dyneema® Blended Sleeve with Smart-Fit® and Thumb Hole

20-21DACPBPTHPT

  • Cut Level: A4
  • ANSI Abrasion Level: 1
  • Ply: Single-Ply
  • Liner Material: ACP/ Dyneema
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Plush Top Elastic
  • Construction: 2x1 Knit, Smart-Fit
  • Sizes: 18"-24"
  • Packed: 144/Case
  • Stock Type: Made to Order
A41X
A41X

Cut Level: A4
Test Method: ASTM F2992-15

Abrasion Level: 1
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 1
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

Compare
Top Grain Goatskin

Kut Gard®

Single-Ply ATA® Ultra Blended Sleeve with Thumb Hole

MS1ATA2X2.5-T

  • Cut Level: A4
  • ANSI Abrasion Level: 1
  • Ply: Single-Ply
  • Liner Material: ATA Fiber Technology/ Aramid
  • Top of Arm: Elastic Cuff
  • Construction: Seamless Knit
  • Size: 18"
  • Packed: 200/Case
  • Stock Type: Stock
A41X
A41X

Cut Level: A4
Test Method: ASTM F2992-15

Abrasion Level: 1
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 1
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

Compare
1-Ply Smart Fit

Kut Gard®

Single-Ply ACP / DuPont™ Kevlar® / Pritex™ Blended Sleeve with Antimicrobial Fibers, Smart-Fit® and Thumb Hole

15-21KVBKTH

  • Cut Level: A4
  • Ply: Single-Ply
  • Liner Material: ACP/ Antimicrobial/ Kevlar/ Pritex
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Elastic Cuff
  • Construction: 2x1 Knit, Smart-Fit
  • Sizes: 14"-18"
  • Packed: 144/Case
  • Stock Type: Stock
    Additional items available for Made-to-Order (MTO) include 15-21KVBK14TH
A4XX
A4XX

Cut Level: A4
Test Method: ASTM F2992-15

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

Compare
2-Ply Tube Knit

Kut Gard®

Single-Ply ACP / Dyneema® Blended Sleeve with Smart-Fit®

20-21DACPBP

  • Cut Level: A4
  • ANSI Abrasion Level: 1
  • Ply: Single-Ply
  • Liner Material: ACP/ Dyneema
  • Top of Arm: Elastic Cuff
  • Construction: 2x1 Knit, Smart-Fit
  • Sizes: 14"-22"
  • Packed: 144/Case
  • Stock Type: Made to Order
A41X
A41X

Cut Level: A4
Test Method: ASTM F2992-15

Abrasion Level: 1
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 1
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

Compare
Rubber

Kut Gard®

Single-Ply ATA® / Hide-Away™ FR Blended Sleeve Blended Sleeve

S13ATAFR/4HA-ES6

  • Cut Level: A4
  • ANSI Abrasion Level: 1
  • ANSI Contact Heat Level: 2
  • Ply: Single-Ply
  • Liner Material: Aramid/ ATA Fiber Technology/ Stainless Steel Wire
  • Top of Arm: Non-Slip
  • Construction: Machine Knit, Seamless Knit
  • Sizes: 18"-22"
  • Packed: 72/Case
  • Stock Type: Stock
A41X
A41X

Cut Level: A4
Test Method: ASTM F2992-15

Abrasion Level: 1
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 1
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
ANSI Contact Heat Level: 2
Test Method: ASTM F1060-18
Temperature: 284°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Compare
1-Ply Machine Knit

Kut Gard®

ATA Technology 13G Wide Sleeve with Thumb Hole, B/G Elastic Top

20-S13ATA/PE4-EW-T-BG

  • Cut Level: A4
  • ANSI Abrasion Level: 3
  • Ply: Single-Ply
  • Liner Material: ATA Fiber Technology/ HPPE/ Polyester
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Blue/Gold Elastic
  • Construction: Machine Knit
  • Size: 22"
  • Packed: 144/Case
  • Stock Type: Stock
A432
A432

Cut Level: A4
Test Method: ASTM F2992-15

Puncture Level: 2
Test Method: ASTM F1342

Abrasion Level: 3
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 3
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
Puncture Level: 2
Test Method: ASTM F1342

The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Compare
1-Ply 2x1 Tube Knit

Kut Gard®

Single-Ply ATA® Blended Sleeve

S-2X1

  • PPE Category: 2
  • Cut Level: A4
  • ANSI Abrasion Level: 1
  • Ply: Single-Ply
  • Liner Material: ATA Fiber Technology/ Aramid
  • Top of Arm: Elastic Cuff
  • Construction: Seamless Knit
  • Size: 22"
  • Packed: 100/Case
  • Stock Type: Made to Order
A41X
A41X

Cut Level: A4
Test Method: ASTM F2992-15

Abrasion Level: 1
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 1
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
ATPV 8.0 Cal/cm2

The NFPA has identified the various FR hazardous risk category levels, which range from PPE 1 (which is low risk and requires AR clothing with a minimum arc rating of 4), up to PPE 4 (which is high risk and requires AR clothing with a minimum arc rating of 40). Each level, 1-4, is rated at a certain amount of flame resistance measured in cal/cm2.

Compare
Rubber

Kut Gard®

Single-Ply ATA® / Sta-Cool™ Blended Sleeve with Thumb Hole - Wide Width

S10ATAFRCM/4-EW-ES6T

  • Cut Level: A4
  • ANSI Abrasion Level: 2
  • ANSI Contact Heat Level: 2
  • Ply: Single-Ply
  • Liner Material: ATA Fiber Technology/ Aramid/ Sta-Cool
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Non-Slip
  • Construction: Machine Knit, Seamless Knit
  • Sizes: 18"-22"
  • Packed: 72/Case
  • Stock Type: Stock
A42X
A42X

Cut Level: A4
Test Method: ASTM F2992-15

Abrasion Level: 2
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 2
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
ANSI Contact Heat Level: 2
Test Method: ASTM F1060-18
Temperature: 284°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Compare
Rubber

Kut Gard®

Single-Ply ATA® / Hide-Away™ FR Blended Sleeve with Thumb Hole - Wide Width

S13ATAFR/4HA-EW-ES6T

  • Cut Level: A4
  • ANSI Abrasion Level: 1
  • ANSI Contact Heat Level: 2
  • Ply: Single-Ply
  • Liner Material: ATA Fiber Technology/ Aramid/ Stainless Steel Wire
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Non-Slip
  • Construction: Machine Knit, Seamless Knit
  • Sizes: 18"-22"
  • Packed: 72/Case
  • Stock Type: Stock
A41X
A41X

Cut Level: A4
Test Method: ASTM F2992-15

Abrasion Level: 1
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 1
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
ANSI Contact Heat Level: 2
Test Method: ASTM F1060-18
Temperature: 284°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Compare
1-Ply 2x1 Tube Knit

Kut Gard®

Single-Ply ATA® Blended with Aramid Sleeve with Sewn-On Knit Wrist and Thumb Hole

S-2X1-H

  • PPE Category: 2
  • Cut Level: A4
  • ANSI Abrasion Level: 1
  • Ply: Single-Ply
  • Liner Material: ATA Fiber Technology/ Aramid
  • Top of Arm: Elastic Cuff
  • Construction: Seamless Knit
  • Size: 22"
  • Packed: 100/Case
  • Stock Type: Made to Order
A41X
A41X

Cut Level: A4
Test Method: ASTM F2992-15

Abrasion Level: 1
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 1
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
ATPV 8.0 Cal/cm2

The NFPA has identified the various FR hazardous risk category levels, which range from PPE 1 (which is low risk and requires AR clothing with a minimum arc rating of 4), up to PPE 4 (which is high risk and requires AR clothing with a minimum arc rating of 40). Each level, 1-4, is rated at a certain amount of flame resistance measured in cal/cm2.

Compare
Rubber

Kut Gard®

Single-Ply ATA® Blended Sleeve with Cotton Plating

MSATAC

  • Cut Level: A4
  • ANSI Abrasion Level: 1
  • Ply: Single-Ply
  • Liner Material: ATA Fiber Technology/ Aramid/ Cotton
  • Top of Arm: Elastic Cuff
  • Construction: Seamless Knit
  • Size: 14"
  • Packed: 300/Case
  • Stock Type: Stock
    Additional items available for Made-to-Order (MTO) include MSATAC-18
A41X
A41X

Cut Level: A4
Test Method: ASTM F2992-15

Abrasion Level: 1
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 1
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

Compare
2-Ply Tube Knit

Kut Gard®

2-Ply ATA® Blended Sleeve with Sta-COOL™ Liner

MSATACM2X2.5

  • Cut Level: A4
  • ANSI Abrasion Level: 1
  • Ply: 2-Ply
  • Liner Material: HPPE/ Stainless Steel Wire/ Sta-Cool
  • Top of Arm: Elastic Cuff
  • Construction: Seamless Knit
  • Size: 18"
  • Packed: 200/Case
  • Stock Type: Made to Order
A41X
A41X

Cut Level: A4
Test Method: ASTM F2992-15

Abrasion Level: 1
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 1
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

Compare
Rubber

Kut Gard®

Single-Ply ATA® / Sta-Cool™ Blended Sleeve - Wide Width

S10ATAFRCM/4-EW-ES6

  • Cut Level: A4
  • ANSI Abrasion Level: 2
  • ANSI Contact Heat Level: 2
  • Ply: Single-Ply
  • Liner Material: ATA Fiber Technology/ Aramid/ Sta-Cool
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Non-Slip
  • Construction: Machine Knit, Seamless Knit
  • Sizes: 18"-22"
  • Packed: 72/Case
  • Stock Type: Stock
A42X
A42X

Cut Level: A4
Test Method: ASTM F2992-15

Abrasion Level: 2
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 2
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
ANSI Contact Heat Level: 2
Test Method: ASTM F1060-18
Temperature: 284°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Compare
Rubber

Kut Gard®

Single-Ply ATA® / Sta-Cool™ Blended Sleeve - Narrow Width

S10ATAFRCM/4-NW-ES6

  • Cut Level: A4
  • ANSI Abrasion Level: 2
  • ANSI Contact Heat Level: 2
  • Ply: Single-Ply
  • Liner Material: ATA Fiber Technology/ Aramid/ Sta-Cool
  • Finger & Thumb: Thumb Hole
  • Top of Arm: Non-Slip
  • Construction: Machine Knit, Seamless Knit
  • Sizes: 18"-22"
  • Packed: 72/Case
  • Stock Type: Made to Order
A42X
A42X

Cut Level: A4
Test Method: ASTM F2992-15

Abrasion Level: 2
Test Method: ASTM D3884-09

ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection. Learn more.

 
Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

 
Abrasion Level: 2
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.

 
ANSI Contact Heat Level: 2
Test Method: ASTM F1060-18
Temperature: 284°F

The ANSI/ISEA 105-2016 standard outlines test methods for contact heat and scored from 0-5. The ASTM F1060-18 test is used to test conductive heat resistance against gloves and PPE. Measuring the highest contact temperature for which the time to second-degree burn is at least 15 seconds and the alarm time is at least four seconds. Learn More

Compare
SHOWING 1-36 OF 43 ITEMS
1 of 2
star What's New
Compare ()
Clear All Compare
Okay, Got it.
X

ORDER SAMPLE

X

GET FIELD TRIAL