Noise You Can’t Hear Is Still Damaging

The quietest noises in your facility may be the ones doing the most damage. Safety managers know how to respond when a grinder screams or a press slams. But what about the ultrasonic welder that bare…

Why PPE Is Now Mission Critical for Manufacturing in 2026

As we enter National Safety Month, manufacturing is undergoing one of the most significant shifts in its history. Smart factories, robotics, and AI-driven operations are accelerating produc…

Overlooked Electrical Hazards That Escalate Fast in Construction

Most electrical incidents on construction sites don’t begin with dramatic failures or obvious mistakes. They start with routine tasks, familiar equipment, and the assumption that conditions haven’t ch…

When Heat Impacts PPE: What to Adjust

Summer heat doesn’t just affect your people, it affects their Personal Protective Equipment (PPE), too. As temperatures climb, protective equipment can start to feel uncomfortable, fit differently, or…

Steel, Decking, and the Edge: Why Standard Fall Protection Falls Short

In many construction environments, fall protection is treated like a compliance checkbox: harness on, lanyard clipped, training complete. But steel erection and decking work don’t operate in a stan…

Dust, Debris, and Concrete Splashes: Is Your Eyewash Where the Risk Is?

Construction sites generate constant airborne hazards, but eyewash access is often an afterthought. When eye injuries happen, seconds matter. If eyewash isn’t immediately accessible, a minor incident ca…

Making the Cut: Where Construction Work Is Really Putting Hands at Risk

Hands are the most valuable tools on any construction site, and the most frequently injured. Despite advances in PPE, severe hand injuries continue to occur at alarming rates. Lacerations, punctures, cr…

The What and Why of Fall Protection: From ABCs to SAFE

Falls remain one of the leading hazards in construction. In 2023, OSHA reported 421 worker fatalities from falls, with thousands more injured. For safety professionals, the challenge isn’t awarene…

Workplace Eye Protection: Why Performance and Comfort Both Matter

No one starts the workday expecting to damage their eyesight. Yet nearly 2,000 workplace eye injuries requiring medical treatment occur each day in the United States. Most are caused by small particles, fl…

How OSHA’s “PPE Must Fit” Rule Impacts Women in Construction

Walk onto any industrial job site today and you’ll see women operating equipment, leading crews, and delivering results. As the workforce evolves, safety expectations are evolving with it. Since OSHA…

Effective Leaders Treat Safety as a Living System

When it comes to safety, “good enough” is not good enough. Too often, safety programs focus on compliance, checking the boxes, passing inspections and hitting recordable incident rate targets. Ho…

The Anatomy of Safety in Construction

Why protecting construction workers matters, and how PPE plays a critical role. Construction shapes the world around us. from highways and hospital, to homes and high-rises, the industry builds the foundat…

Out in the Cold: Preparing Crews for Winter Work Hazards

Winter weather creates serious hazards for employees who work outdoors. Cold temperatures, wind, snow and ice don’t just make jobsites uncomfortable, they increase the risk of injury, illness and l…

Top Snag Hazards for Workers in Hi-Vis Gear (And How to Avoid Them)

High-visibility (hi-vis) clothing is an essential component of workplace safety, helping workers remain visible in hazardous environments such as construction sites, roadways, utilities and industrial faciliti…

ESG as a Value Creator: Building Trust Through Transparency in PPE

Over the past few years, ESG has undergone a profound transformation—from a ratings-driven exercise to a strategic framework shaping innovation, supply chains, and long-term value creation. In thi…

5 Tips for Companies Considering Making the Switch to In-House Laundering Programs

Rising operating costs, stricter hygiene standards and the push for faster turnaround times are driving many companies to revisit how they manage workwear laundering. For industries where workers depend on…

From Skeptic to Believer: How Type II Head Protection Prevented a Serious Injury

As job site safety requirements continue to evolve, more construction companies are updating their PPE programs to include Type II safety helmets designed to provide both top and lateral impact protection in…

Duck Canvas Reinvented for Modern Safety Apparel

Once primarily associated with durable outdoor apparel and traditional workwear, duck canvas has found a lasting place in the high-visibility (hi-vis) safety apparel industry. Duck canvas was initially made fr…

Addressing PPE Fatigue - How to Encourage Consistent Use of High-Visibility Gear

Safety gear, such as high visibility apparel, respirators, hearing protection and safety goggles, is designed to keep workers safe, but it only works if workers use it properly. When workers neglect to…

6 Things You Need to Know About Wind-Resistant Hi-Vis Apparel

As a leader responsible for worker safety in outdoor environments, ensuring employees are equipped with the right safety apparel is crucial. Hi-visibility (hi-vis) wind-resistant apparel plays a crucial role in p…

PosiGrip MAX™ — The Grip Behind Smarter Manufacturing Operations

In manufacturing, hands serve as the most valuable tools on the job. Yet, for decades, different glove coatings have forced workers into tough trade-offs. Polyurethane, nitrile and latex each bring thei…

Do Warehouse Employees Need Hi-Vis Clothing?

As an employer, you may be wondering, “Do warehouse employees need to wear hi-vis clothing?” This is an important question to answer, both from a legal obligation, as well as from a safety best pra…

How to Customize Safety Apparel to Keep Workers Warm and Visible

For employees who work in cold environments, a uniform is more than a form of identification and corporate branding. Uniforms protect against the cold and provide ANSI-compliant high-visibility. There is curren…

ASTM F1060 vs. EN 407 – Why Different Heat Resistance Tests Exist, and Which One Makes Sense for You

Whether it’s pulling hot parts off a press, welding near open flame or working around molten metal, many industrial jobs require reliable heat-resistant hand protection. But when it comes to evaluating g…

Weatherproofing Your Safety - Essential Construction PPE for Any Environment

From blazing heat waves to freezing cold fronts and everything in between, construction crews face more extreme weather than ever before. As climate conditions grow less predictable, the demand for pe…

The Importance of Keeping PPE Current in Mining Environments

Mining is among the most demanding of industries, requiring workers to navigate confined spaces, extreme conditions and heavy machinery. So, what happens when the gear designed to protect workers, helmets, g…

Beyond the Basics – Redefining Women’s Workwear for Safety, Comfort and Performance

The industrial workplace has long operated under the assumption that one-size-fits-all safety gear adequately protects all workers. For decades, women have been forced to navigate hazardous environment…

Choosing the Right Gloves for Automotive Manufacturing and Aftermarket Environments

In the fast-paced world of automotive manufacturing and aftermarket services, hands are the most valuable tools. Whether assembling intricate vehicle components on production lines, performing maintenanc…

Through the Wringer: How Industrial Launderable Workwear Stands Up to Mining and Oil & Gas

In 2025, the mining and oil & gas industries continue to play a critical role in global energy production and resource extraction. With increasing demand for raw materials and energy, companies are p…

Disaster Relief PPE – Essential Protection for Rescue and Recovery Teams

When disaster strikes, rescue and recovery teams, alongside civilian volunteers, are the first to step in, often putting themselves in harm’s way to save lives and restore order. Whether facing the…

Barrier Solutions for Clean and Efficient EV Battery Production

The adoption of electric vehicles (EVs) has been increasing. With EV battery costs projected to decrease by almost 50% by 2026, the global shift toward sustainable transportation is gaining momentum. Howeve…

The Cut Protection Evolution: Why It’s Time to Upgrade to A4-A6 Gloves

For years, A2 and A3 cut-resistant gloves were the go-to standard for hand protection. But today’s fast-paced workplaces – where new materials, faster processes and unexpected distractions ar…

Trends, Innovations, Sustainability and the Future of Cut-Resistant Gloves

Cut-resistant gloves have significantly evolved to meet changing customer demands, regulatory requirements, technological advancements and sustainability goals. To gain insights into these developments, w…

Essential PPE for Contamination Control in High-Sensitivity Manufacturing Environments

In high-sensitivity manufacturing environments in industries such as semiconductor, aerospace, lithium-ion battery manufacturing and advanced fabrication, the importance of contamination control cannot be ov…

Understanding the Main Differences in a Welding Jacket

When sparks fly and temperatures rise, a welder's welding jacket is their first line of defense to combat heat. But choosing the wrong material can mean discomfort at best and serious injury at worst. With…

Revolutionizing Safety with GORE-TEX Pyrad® for Unmatched Arc-Rated PPE Comfort

Every second counts when working with electrical hazards; without the right gear, danger can strike in a flash. Despite national regulations designed to protect employees in these high-risk environments, …

Make the Swap: Sustainable Hearing Protection that Doesn't Break the Bank

As the global shift toward sustainability gathers momentum, industries are seeking to integrate environmentally responsible practices at all levels of operation. One key area of focus is personal protective…

Advanced Head Protection Equipment for Safer Construction Sites

Protecting workers from head injuries is a top priority in high-risk industries like construction, where head protection can be the difference between life and death. In the US alone, construction workers account…

How the New ANSI/ASSP Heat Stress Standard is Intensifying Workplace Safety

Heat stress is a growing concern for industries, like construction, mining, welding, manufacturing and utilities, where workers face high temperatures, humidity and physically demanding tasks. It can le…

The Importance of Providing Proper Fitting PPE For Women

Personal Protective Equipment (PPE) is vital in ensuring worker safety across all trade industries. However, when PPE doesn't fit correctly, it can be just as dangerous as not wearing any protection at all. This issue…

Spotlight on Safety - Trends from NSC Safety Congress & Expo

Last September, safety professionals worldwide gathered in Orlando, FL, for the NSC Safety Congress & Expo, where the latest industry advancements and ideas took center stage. Our team arrived wi…

Nitrile vs. Latex Coated Gloves – Which is the Best For Your Workforce?

When it comes to choosing work gloves, selecting the right coating can make all the difference in safety, comfort and performance. Nitrile and latex coatings both offer unique benefits, making them su…

4 Hidden Jobsite Risks - And How To Avoid Them

Nearly five million workers currently make up the American construction industry. That includes laborers, carpenters, trade and extraction workers, site managers and others. While it may not be apparent fr…

Experience Barrier Protection and Flexibility With Extended Use Gloves

Barrier glove technology has changed dramatically over the last 10 years as glove demand has increased. Gone are the days when rough hands or stained fingers defined what we did for a living. Today, ev…

The Evolution of Hand Protection: Advancements, Challenges and Future Directions

Hand protection has seen significant advancements in the past five years, driven by the need to reduce hand injuries and enhance worker safety across various industries. With evolving technologies and ma…

Construction Hand Protection 101: Spotting and Mitigating Risks

In construction, hands are everything – they’re essential for every task, whether it’s operating heavy machinery, handling materials or doing precision work. Protecting them isn’t ju…

EN 388 vs ANSI/ISEA 105: Understanding the Key Differences in Hand Protection Safety Standards

When it comes to evaluating the protection levels of work gloves, two major industry standards are recognized worldwide: ANSI/ISEA 105-2016 and EN 388:2016. The ANSI/ISEA 105-2016 standard, developed …

How D3O®iP™ Technology Is Setting A New Standard For Hand Protection

Impact-related hand injuries are the most common occupational hazards in the industrial work force. According to a study conducted by the U.S. Department of Labor between 2021-2022, 23 percent of all work-rel…

Enhancing Workplace Safety in the Construction Industry with Multi-Directional Head Protection Technology

It’s no surprise that workers in the construction industry are at a high risk of accidents; the industry consistently ranks as one of the most dangerous in the U.S. The causes of workplace injuries have…

Unraveling The Dynamics of ESD Safety

When it comes to Electrostatic Discharge (ESD) Safety, it’s all about control – static control. The ESD Association® sets many of the global standards that are considered guiding principles for static con…

Specialized PPE For Electric Vehicle Manufacturing

For years, the United States has been the second largest manufacturer of motor vehicles, manufacturing over 1.5 million cars and 7.6 million commercial vehicles annually due largely to leading companies li…

Surviving the Summer Heat: A Guide to Workplace Safety and Hydration

With rising temperatures comes an increased risk of heat-related illnesses. These conditions arise when the body struggles to maintain its internal temperature due to excessive heat exposure, leading to p…

Protective Gear for TIG Welding

April is National Welding Month and at PIP®, we want to take this opportunity to celebrate and appreciate the hard-working welders who shape the backbone of various industries across the country. If you&rsquo…

What to Consider When Choosing High-Visibility Multi-Season Workwear

Winter and Spring can be a hazardous time of year for people who work outdoors. That's why companies must train their employees on how to stay safe while also providing them with the proper protective eq…

Motor Vehicle Manufacturing: Supporting A Successful Safety Program

The Automotive industry, a pillar of America’s economic strength, continues to demonstrate steady growth with rising employment numbers. According to the BLS, employment within the motor vehicles an…

Multi-task Welding Gloves Offer The Protection And Dexterity Welders Need

If you’re well-versed with the welding trade, you’ll know that a welder spends the majority of their time not necessarily welding.  In fact, welders only spend approximately 25% of th…

Why Welders Need Cut-Resistant Gloves

Hand injuries are among the most common workplace injuries, with over a third involving lacerations. It's not hard to understand why, after all, hands are often closest in proximity to workplace hazards. Th…

Safety Helmets with Mips® Offer Protection from Linear and Rotational Impacts

Head protection has come a long way since the day of the “Hard-Boiled Hat” which made its appearance in the early 1920s to protect members of the U.S. Navy and coastal shipyard workers from im…

Sustainable Solutions in PPE

Sustainable, eco-friendly, biodegradable… We can go on and on. Every day, we are bombarded with product alternatives that claim to be better for the environment – almost to the point that it…

A Welder's Guide to Avoiding Cold Related Injury and Illness

Extreme cold weather is a dangerous situation that can bring on health emergencies and welders working in cold environments are no exception to this. All workers who are exposed to extreme cold are at ris…

The Psychology Behind Effective Food Safety Culture

What’s the first thing you think of when you see a firefighter helmet? If your answer was hero, rescue, save, protect or first responder, you’d be in line with the majority of Americans. The…

Understanding The Differences Between Antimicrobial, Antiviral and Antibacterial Hand Protection

ANTIMICROBIAL - ANTIVIRAL - ANTIBACTERIAL: What Does This All Mean for Hand Protection? by Anthony Di Giovanni, Vice President of Global Marketing Safety managers are demanding PPE tha…

Reusable vs. Disposable – Using The Right Garment For The Right Job

Disposable garments or reusable garments – which choice is right for you? There has always been back-and-forth about whether reusable or disposable garments are best for the workplace. Safety ma…

Top 3 Trending Safety Solutions in Construction

  According to OSHA, the continuously evolving construction industry accounts for one in five worker fatalities across all private industries. It is crucial to stay vigilant and take the best safety precautions available when facing the multiple hazards present on a construction job site. …

Heat Resistant Gloves Are A Hot Topic

Customers often ask us, “What do you mean by ‘light heat resistance’ with these gloves (or sleeves)?” Whether consciously or not – they are looking for some sort of assurance th…

What is Double Hearing Protection and When Would You Need It?

You might be asking yourself if double hearing protection is something you should be considering. In order to understand what double hearing protection is, let’s start by reviewing why it is nee…

6 Key Facts to Help Understand ARC Flash Risks

There are few things no utility worker wants to experience – ARC flash is one of them. The phenomenon is described as a sudden, bright, blinding light and heat that occurs because of a rapid relea…

3 Common Types of Cold Stress - And How You Can Prepare For Them

Whether we're ready or not, winter will be here before we know it. Now is the perfect time to start planning ahead to stay prepared. No matter what winter throws your way—whether it's blizzards, fr…

ANSI/ISEA 138-2019 Classification For Impact Resistant Gloves Helps Decrease Back-Of-The-Hand Injuries

Impact protection has been a hot topic in the hand protection space all year due to the roll-out and adaptation of the new American National Standard for Performance and Classification for Impact-Resistant Gl…

10 Things To Consider When Selecting A Hard Hat

If the hard hat is comfortable for the worker, it is more likely to remain on the workers head. The seasoned worker who has been on the worksite longer is accustomed to wearing a hard hat for long du…

Disposable Gloves for Heavy-Duty Industrial Jobs?

Many current studies related to the global safety market will highlight how disposable gloves account for a growing share of glove consumption. One research document boldly professes that "disposable gl…

Noise Induced Hearing Loss Is 100% Preventable. With The Correct PPE.

It seems like every other article on hearing protection is talking about Noise Induced Hearing Loss. And for good reason; Noise Induced Hearing Loss, or NIHL as it’s commonly referred to, is a "s…

Protective Sleeve Buyers Guide

When it comes to arm protection, you don't have to settle for what's already out there. Each work environment, task and person provide a different set of variables that affect the type of protection re…

Cut Protection Fit for a Knight

Cut protection gloves have undergone a wide array of changes over the years. Original cut protection goes back centuries when metal armor and chainmail were used for protection. This was an effective to…