Impact & Anti-Vibration
Using only the best in synthetics and leather materials, we produce multiple high performance gloves for specific applications. As leaders in hand protection, we offer innovative products that are suited for you.
LEARN MORE ABOUT HAND PROTECTION
Maximum Safety®
AR/FR Top Grain Goatskin Leather Drivers Glove with Kevlar® Liner - Straight Thumb09-K3750
- Goatskin Leather Drivers
- Straight Thumb
- 13 Gauge Kevlar Cut Lining
- ATPV 28.5 cal/cm2
- Flame Retardant
- Chromium VI Free
- Slip-On Cuff
- SIZES: S-3XL
- PACKED: 6 Dozen/Case
Test Method: ASTM F2992-15
New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.
Abrasion: 3
Cut (Coupe Test): 3
Tear: 2
Puncture: 2
Cut (TDM-100 Test): B
Impact Protection: X
EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.
The NFPA has identified the various FR hazardous risk category levels, which range from PPE 1 (which is low risk and requires AR clothing with a minimum arc rating of 4), up to PPE 4 (which is high risk and requires AR clothing with a minimum arc rating of 40). Each level, 1-4, is rated at a certain amount of flame resistance measured in cal/cm2.

Maximum Safety®
Viz™ Workman's Glove with Synthetic Leather Palm and Fabric Back - PVC Grip on Index Finger/Thumb120-4600
- Synthetic Leather Palm
- Hi-Vis Orange Spandex Fabric Back
- PVC Grip on Index Finger & Thumb
- Reinforced Thumb Crotch
- Slip-on Cuff
- SIZES: S-2XL
- PACKED: 72 Pair/Case

Maximum Safety®
TuffMax3™ Seamless Knit HPPE Blend with Nitrile Grip and TPR Impact Protection120-5130
- Seamless Knit HPPE Blend
- 13G Hi-Vis Green
- MicroSurface Nitrile Grip
- Padded Palm
- Impact Level 2
- Reinforced Thumb Crotch
- Hook & Loop Wrist
- SIZES: S-2XL
- PACKED: 72 Pair/Case
Test Method: ASTM F2992-15
New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.
Abrasion: 4
Cut (Coupe Test): 3
Tear: 4
Puncture: 3
Cut (TDM-100 Test): B
Impact Protection: X
EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.
ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Imapct Series.

Maximum Safety®
TuffMax5™ Seamless Knit HPPE Blend with Nitrile Grip and TPR Impact Protection120-5150
- Seamless Knit HPPE Blend
- 13G HV Orange
- MicroSurface Nitrile Grip
- Padded Palm
- Impact Level 2
- Reinforced Thumb Crotch
- Hook & Loop Wrist
- SIZES: M-2XL
- PACKED: 72 Pair/Case
Test Method: ASTM F2992-15
New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.
Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 4
Cut (TDM-100 Test): D
Impact Protection: P
EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.
ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Imapct Series.

Maximum Safety®
MOG™ Synthetic Leather Palm with Fabric Back - TPR Impact Protection120-5900
- Synthetic Leather Palm w/ Reinforcements
- Hi-Vis Orange Spandex Back
- TPR Impact Level 1
- Hook & Loop Wrist Closure
- SIZES: M-3XL
- PACKED: 72 Pair/Case
Abrasion: 3
Cut (Coupe Test): 1
Tear: 1
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X
EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.
ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Imapct Series.

Boss®
Miners' Mechanic Synthetic Leather Palm with Foam Padded Back and TPR Finger Impact Protection1JM400
- Synthetic Leather Palm
- Hi-Vis Foam Padded Back
- Wing Thumb
- Reflective Knuckle Strap
- TPR Finger Impact Protection
- Hook & Loop Wrist Closure
- SIZES: M-3XL
- PACKED: 72 Pair/Case

Boss®
Miners' Mechanic Synthetic Leather Palm with Foam Padded Back and TPR Finger Impact Protection - PVC Patch Grip1JM500
- Synthetic Leather Palm w/ PVC Patches
- Hi-Vis Foam Padded Back
- TPR Finger Impact Protection
- Wing Thumb
- Hook & Loop Wrist Closure
- SIZES: M-3XL
- PACKED: 72 Pair/Case

Boss®
Synthetic Leather Palm with PVC Dots and Foam Padded Fabric Back - TRP Impact Protection1JM600
- Synthetic Leather Palm w/ PVC Dots
- Hi-Vis Yellow Foam Padded Back
- TPR Impact Protection
- Reflective Knuckle Strap
- Neoprene Cuff
- SIZES: S-3XL
- PACKED: 72 Pair/Case
Test Method: ASTM F2992-15
New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.
Abrasion:
Cut (Coupe Test):
Tear:
Puncture: 4
Cut (TDM-100 Test):
Impact Protection:
EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Boss®
Miners' Mechanic Synthetic Leather Palm with PVC Patches, Foam Padded and TPR Finger Impact Protection - Insulated & Waterproof1JM650
- Synthetic Leather Palm w/ PVC Patches
- Hi-Vis Foam Padded Back
- TPR Finger Impact Protect
- Insulated
- Waterproof Insert
- H&L Wrist Closure
- SIZES: M-2XL
- PACKED: 72 Pair/Case

Boss®
Synthetic Leather Palm with Fabric Back and TPR Impact Protection - Neoprene Wrist1JM750
- Synthetic Leather Palm
- Hi-Vis Yellow Fabric Back
- TPR Impact
- Neoprene Cuff
- STYLE ON CLOSEOUT AT A GREAT PRICE!
- SIZES: M-3XL
- PACKED: 72 Pair/Case
Test Method: ASTM F2992-15
New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.
Abrasion: 4
Cut (Coupe Test): 3
Tear: 3
Puncture: 2
Cut (TDM-100 Test):
Impact Protection:
EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

PosiGrip®
Seamless Knit Aramid Blended Glove with Nitrile Foam Coated Grip on Palm & Fingers713KSSN
- Seamless Knit Aramid Blend Shell
- 13 Gauge Green
- Black Nitrile Foam Coated Grip
- Palm & Fingertips
- ATPV 4.4 cal/cm2
- Knit Wrist
- SIZES: XS-3XL
- PACKED: 12 Dozen/Case
Test Method: ASTM F2992-15
New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.
Abrasion: 4
Cut (Coupe Test): 5
Tear: 4
Puncture: 2
Cut (TDM-100 Test): F
Impact Protection: X
EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.
The NFPA has identified the various FR hazardous risk category levels, which range from PPE 1 (which is low risk and requires AR clothing with a minimum arc rating of 4), up to PPE 4 (which is high risk and requires AR clothing with a minimum arc rating of 40). Each level, 1-4, is rated at a certain amount of flame resistance measured in cal/cm2.

R2 RigRunner™
Synthetic Leather Double Palm with PVC Dotted Grip and Fabric Back - TPR Impact Protection87000
- Synthetic Leather Double Palm
- Red PVC Dotted Grip
- Hi-Vis Orange Spandex Back
- TPR Impact Protection
- Slip-On Neoprene Cuff
- SIZES: S-3XL
- PACKED: 72 Pair/Case
Test Method: ASTM F2992-15
New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.
Abrasion: 3
Cut (Coupe Test): 3
Tear: 4
Puncture: 2
Cut (TDM-100 Test):
Impact Protection:
EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

R2 RigAce™
Synthetic Leather Double Palm with Silicone Palm and Fabric Back - TPR Impact Protection87010
- Synthetic Leather Double Palm
- Red Silicone Grip
- Hi-Vis Orange Spandex Back
- TPR Impact Protection
- Slip-On Neoprene Cuff
- SIZES: S-3XL
- PACKED: 72 Pair/Case
Abrasion: 3
Cut (Coupe Test): 2
Tear: 2
Puncture: 1
Cut (TDM-100 Test):
Impact Protection:
EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

R2 RigCat™
R2 Rig Cat 287020
- Synthetic Leather Palm
- Cut Protection
- Impact Protection
- TPR on Back of Hand
- Long Neoprene Cuff
- SIZES: S-3XL
- PACKED: 72 Pair/Case
Abrasion: 3
Cut (Coupe Test): 2
Tear: 4
Puncture: 3
Cut (TDM-100 Test):
Impact Protection:
EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

R2 RigCat™
R2 Rig Cat 587030
- Silicone Palm
- Cut Protection
- Kevlar Thumb Reinforcement
- TPR on Back of Hand
- Long Neoprene Cuff
- SIZES: S-3XL
- PACKED: 72 Pair/Case
Test Method: ASTM F2992-15
New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.
Abrasion: 3
Cut (Coupe Test): 5
Tear: 4
Puncture: 3
Cut (TDM-100 Test): D
Impact Protection: X
EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.
ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Imapct Series.

R2™
R2 Safety Rigger Green Corded Palm87800
- Green Cotton Corded Palm
- TPR on Back of Hand
- Hook and Loop Cuff
- Cut Protection
- SIZES: S-3XL
- PACKED: 72 Pair/Case
Test Method: ASTM F2992-15
New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.
Abrasion: 1
Cut (Coupe Test): 2
Tear: 3
Puncture: 1
Cut (TDM-100 Test): B
Impact Protection:
EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

R2™
Synthetic Leather Double Palm with Silicone Grip and Fabric Back - TPR Impact Protection87810
- Synthetic Leather Double Palm
- Red Silicone Palm and Fingers
- TRP on Back of Hand
- Index Finger Touchscreen
- Hook and Loop Closure
- SIZES: S-3XL
- PACKED: 72 Pair/Case
Test Method: ASTM F2992-15
New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.
ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Imapct Series.

R2™
R2 Safety Rigger Insulated87811
- Synthetic Leather Double Palm
- Red Silicone Palm and Fingers
- TPR on Back of Hand
- Fleece Lining and Waterproof Insert
- Hook & Loop Closure
- SIZES: S-3XL
- PACKED: 72 Pair/Case
Test Method: ASTM F2992-15
New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.
Abrasion: 3
Cut (Coupe Test): 2
Tear: 3
Puncture: 2
Cut (TDM-100 Test):
Impact Protection: P
EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.
ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Imapct Series.

R2™
R2 Winter Green Corded Palm Rigger Glove with Hook and Loop Wrist87812
- Green Cotton Corded Palm
- TPR on Back of Hand
- Hook and Loop Closure
- Waterproof Lining
- 150 Gram Positherm
- SIZES: S-3XL
- PACKED: 72 Pair/Case
Test Method: ASTM F2992-15
New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.
Abrasion: 1
Cut (Coupe Test): 3
Tear: 3
Puncture: 3
Cut (TDM-100 Test): C
Impact Protection:
EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

R2™
R2 Safety Rigger Utility Glove87820
- Silicone Grip on Palm and Fingers
- TPR on Back of Hand
- Hook and Loop Closure
- SIZES: S-3XL
- PACKED: 72 Pair/Case

R2™
R2 Safety Rigger87830
- Padded Palm
- TPR on Back of Hand
- Touchscreen Index Finger
- Pull-On Cuff
- SIZES: S-3XL
- PACKED: 72 Pair/Case

R2™
R2 Safety Rigger87840
- Rigger Glove
- TPR on Back of Hand
- Touchscreen Index Finger
- Hook and Loop Closure
- SIZES: S-3XL
- PACKED: 72 Pair/Case
Test Method: ASTM F2992-15
New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

R2™
Reinforced Synthetic Leather Palm Glove with Spandex Back and TPR Molded Knuckle and Dorsal Guards - Touchscreen Compatible87850
- Hi-Vis TPR on Back of Hand and Fingers
- Touchscreen Index Finger
- Hook and Loop Closure
- SIZES: S-3XL
- PACKED: 72 Pair/Case
Test Method: ASTM F2992-15
New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.
Abrasion: 4
Cut (Coupe Test): 3
Tear: 4
Puncture: 4
Cut (TDM-100 Test): E
Impact Protection:
EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

West Chester®
Oil Armor™ Finish Top Grain Goatskin Leather Drivers Glove w/ Para-Aramid and Fleece Lining - Keystone ThumbKS9911KP
- Goatskin Leather Drivers
- Premium Grade
- Keystone Thumb
- Fleece Lined
- Oil Armor Technology
- Para-Aramid Cut Lining
- ATPV 43 cal/cm2
- SIZES: S-3XL
- PACKED: 72 Pair/Case
Test Method: ASTM F2992-15
New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.
Abrasion: 2
Cut (Coupe Test): 5
Tear: 2
Puncture: 4
Cut (TDM-100 Test): D
Impact Protection: X
EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.
The NFPA has identified the various FR hazardous risk category levels, which range from PPE 1 (which is low risk and requires AR clothing with a minimum arc rating of 4), up to PPE 4 (which is high risk and requires AR clothing with a minimum arc rating of 40). Each level, 1-4, is rated at a certain amount of flame resistance measured in cal/cm2.

West Chester®
AR Top Grain Cowhide Leather Drivers Glove with Para-Aramid Lining - Keystone ThumbKS992K
- Cowhide Leather Drivers
- Premium Grade
- Keystone Thumb
- Para-Aramid Cut Lining
- ATPV 43 cal/cm2
- Slip-On Cuff
- SIZES: S-3XL
- PACKED: 72 Pair/Case
Test Method: ASTM F2992-15
New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.
Abrasion: 3
Cut (Coupe Test): X
Tear: 3
Puncture: 2
Cut (TDM-100 Test): D
Impact Protection: X
EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.
The NFPA has identified the various FR hazardous risk category levels, which range from PPE 1 (which is low risk and requires AR clothing with a minimum arc rating of 4), up to PPE 4 (which is high risk and requires AR clothing with a minimum arc rating of 40). Each level, 1-4, is rated at a certain amount of flame resistance measured in cal/cm2.

West Chester®
Oil Armor™ Finish Top Grain Goatskin Leather Drivers Glove with Para-Aramid Lining - Keystone ThumbKS993KOA
- Goatskin Leather Drivers
- Premium Grade
- Keystone Thumb
- Oil Armor Technology
- Para-Aramid Cut Lining
- ATPV 43 cal/cm2
- Slip-On Cuff
- SIZES: S-3XL
- PACKED: 72 Pair/Case
Test Method: ASTM F2992-15
New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.
Abrasion: 3
Cut (Coupe Test): X
Tear: 2
Puncture: 2
Cut (TDM-100 Test): D
Impact Protection: X
EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.
The NFPA has identified the various FR hazardous risk category levels, which range from PPE 1 (which is low risk and requires AR clothing with a minimum arc rating of 4), up to PPE 4 (which is high risk and requires AR clothing with a minimum arc rating of 40). Each level, 1-4, is rated at a certain amount of flame resistance measured in cal/cm2.

West Chester®
Oil Armor™ Finish Top Grain Goatskin Leather Drivers Glove with Para-Aramid Lining and TPR Impact Protection - Keystone ThumbKS993KOAB
- Goatskin Leather Drivers
- Premium Grade
- Keystone Thumb
- Oil Armor Tech
- Para-Aramid Cut Lining
- TPR Impact Protection
- ATPV 43 cal/cm2
- SIZES: S-3XL
- PACKED: 72 Pair/Case
Test Method: ASTM F2992-15
New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.
Abrasion: 3
Cut (Coupe Test): X
Tear: 2
Puncture: 2
Cut (TDM-100 Test): D
Impact Protection: X
EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.
ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Imapct Series.
The NFPA has identified the various FR hazardous risk category levels, which range from PPE 1 (which is low risk and requires AR clothing with a minimum arc rating of 4), up to PPE 4 (which is high risk and requires AR clothing with a minimum arc rating of 40). Each level, 1-4, is rated at a certain amount of flame resistance measured in cal/cm2.