G-Tek® ECO Series™: Seamless Knit Dyneema® Pho

PRODUCTS HAND PROTECTION CUT RESISTANT GLOVES GLOVES MADE WITH DYNEEMA DYNEEMA DIAMOND WITH POLYURETHANE

G-Tek® ECO Series™

Seamless Knit Dyneema® Phoenix Blended Glove with Polyurethane Coated Flat Grip on Palm & Fingers

19-D320

Available Colors:

SIZES: XS-2XL
Packed: 6 Dozen/Case
STOCK TYPE: Stock
Country of Origin: China

Liner Material: Dyneema Phoenix
Coating: Polyurethane
Grip: Flat
Gauge: 13

VIEW SPEC SHEET REQUEST A SAMPLE

Product Attributes

Liner Material: Dyneema Phoenix

Dyneema Phoenix:

View All Dyneema Phoenix

Coating: Polyurethane

Polyurethane: Polyurethane (PU) is a tough, proven material that offers good tactile sensitivity by way of its thin material deposit. It conforms intimately over multiple glove liners to provide flexibility, dexterity and tactile sensitivity. PU coated gloves are among the most commonly used because they are versatile and provide excellent value. Newer, water-based PU coatings offer improved flexibility and less environmental lifecycle impact.

View All Polyurethane

Grip: Flat

Flat: Flat coatings take on the surface properties of the glove liner which results in the thin, conformable deposit of coating material. This results in high dexterity glove with tactile grip in dry and in slightly oily conditions.

View All Flat

Product Description

Description
Details

Product Description

Used for electronics, glass cutting, sheet metal handling, parts assembly, sharp small parts handling, construction and general duty.

Features

Seamless construction offers increased comfort and breathability
Spun Dyneema® Phoenix & Spandex shell is lightweight and provides excellent dexterity, tactile sensitivity and cut resistance
Bio-Based Dyneema fiber provides same performance & protection, while providing lower carbon footprint
Dyneema® bio-based fibers equates to 450g of CO2 emissions reduction per pair when compared to traditional Dyneema® fibers
Polyurethane coatings take on the surface properties of the glove liner providing a tactile grip in dry and slightly oily conditions, ideal for applications that require dexterity for precise handling
Knit Wrist helps prevent dirt and debris from entering the glove
Color coded hems for easy size identification
Washable, resistant to chemicals, water, and ultraviolet light
WARNING: Cancer - www.P65Warnings.ca.gov

G-Tek ECOSeries
Gray Dyneema Phoenix
13 Gauge
Gray Polyurethane Co ated Palm
EN Cut Level 4

Standards Met

ANSI Cut Level: A4

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

EN 388 2016 Results: 4X42DX

Abrasion: 4 Cut (Coupe Test): X Tear: 4 Puncture: 2 Cut (TDM-100 Test): D Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ANSI Abrasion Level: 6

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI Puncture Level: 3

Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Beginning of Life - Made from Bio-Based Materials

PIP® has collaborated with global partners like Dyneema® to develop bio-based ultra-high molecular weight polyethylene fiber delivers the same performance as conventional HPPE fibers, but with a lower carbon footprint. This innovative technique utilizes the mass balance approach and further reduces our reliance on fossil fuel-based resources.

End of Life - Recyclable via TerraCycle® Regulated Waste

Reduce waste put into landfill by recycling used PPE through the EasyPak™ recycling program. EasyPak™ containers are a safe and simple way to recycle your PPE.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Chemical Permeation

The chemical permeation of our product is measured in accordance to European Standard EN 374-3. This measures the resistance of protective gloves against chemicals and microorganisms. Part 3 of the standard determines the level of resistance to permeation by chemicals.

Breakthrough Time (BTT)

The number of minutes from initial contact with a test chemical until it is first detected on the inside of the glove.

Breakthrough Time - Protection Index

Each chemical tested is classified in terms of breakthrough time (performance level 0 to 6).

CAUTION: This information is provided as an aid in determining the general suitability of various products for use with specific chemicals. These recommendations are advisory only and the SUITABILITY OF THE PRODUCT FOR A SPECIFIC APPLICATION OR ENVIRONMENT MUST BE DETERMINED BY THE PURCHASER OR USER OF THE PRODUCT. This information should be used as a guide only.

Chemical Name	Level	BTT

Request A Sample

The G-Tek® brand is applied to seamless knit coated gloves used for various cut protection and general purpose applications for various industrial, construction, and MRO applications. As a comprehensive line of hand protection, G-Tek® encompasses several technology platforms to meet the various needs of the market. Each cut resistant glove is tested to both ANSI and EN standards, and test scores are readily available on each product’s webpage.

View Products

North America

Europe

Asia & Pacific

North America

Europe

Asia & Pacific

G-Tek® ECO Series™

Liner Material: Dyneema Phoenix

Coating: Polyurethane

Grip: Flat

Product Description

Features

ANSI Cut Level: A4

EN 388 2016 Results: 4X42DX

ANSI Abrasion Level: 6

ANSI Puncture Level: 3

Beginning of Life - Made from Bio-Based Materials

End of Life - Recyclable via TerraCycle® Regulated Waste

Extended Life - Reusable/Launderable

Chemical Permeation

Breakthrough Time (BTT)

Breakthrough Time - Protection Index

Chemical Name

Level

BTT

Request A Sample

Compare ()

ORDER SAMPLE

GET FIELD TRIAL