Protect Your Hands
PIP offers the widest range of Seamless Cut-Resistant gloves and sleeves anywhere in the world. Cut-Resistant products are extensively used in industrial, construction and food processing markets. The use of Cut-Resistant gloves and sleeves has increased considerably over the years as we've led with the introductions of new yarns and grips.
LEARN MORE ABOUT HAND PROTECTION
Kut Gard®
Seamless Knit Dyneema® Glove - Light Weight17-D200
- Gloves of Filament Yarns with Dyneema
- 13 Gauge
- Light Weight
- White
- EN Cut Level 3
- SIZES: XXS-XL
- PACKED: 6 Dozen/Case
- STOCK TYPE: Stock
Test Method: ASTM F2992-15
New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.
TAA identified products are manufactured or "substantially transformed" in the United States or a TAA "designated country".
For more details go to www.gsa.federalschedules.com/resources/taa-designated-countries/
Kut Gard®
Seamless Knit Dyneema® Glove - Medium Weight17-D300
- Gloves of Filament Yarns with Dyneema
- 7 Gauge
- Medium Weight
- White
- EN Cut Level 3
- SIZES: XS-XL
- PACKED: 6 Dozen/Case
- STOCK TYPE: Stock
Test Method: ASTM F2992-15
New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.
TAA identified products are manufactured or "substantially transformed" in the United States or a TAA "designated country".
For more details go to www.gsa.federalschedules.com/resources/taa-designated-countries/
Kut Gard®
Seamless Knit Dyneema® Glove - Heavy Weight17-D350
- Gloves of Filament Yarns with Dyneema
- 7 Gauge
- Heavy Weight
- White
- EN Cut Level 4
- SIZES: XS-XL
- PACKED: 6 Dozen/Case
- STOCK TYPE: Made to Order
Test Method: ASTM F2992-15
New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.
TAA identified products are manufactured or "substantially transformed" in the United States or a TAA "designated country".
For more details go to www.gsa.federalschedules.com/resources/taa-designated-countries/
Kut Gard®
Seamless Knit Dyneema® / Elastane Glove - Light Weight17-DL200
- 13 Gauge
- Light Weight
- SIZES: XS-XL
- PACKED: 6 Dozen/Case
- STOCK TYPE: Stock
Test Method: ASTM F2992-15
New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.
TAA identified products are manufactured or "substantially transformed" in the United States or a TAA "designated country".
For more details go to www.gsa.federalschedules.com/resources/taa-designated-countries/
Kut Gard®
Seamless Knit Dyneema® / Elastane Glove - Medium Weight17-DL300
- 7 Gauge
- Medium Weight
- SIZES: XS-2XL
- PACKED: 6 Dozen/Case
- STOCK TYPE: Stock
Test Method: ASTM F2992-15
New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.
TAA identified products are manufactured or "substantially transformed" in the United States or a TAA "designated country".
For more details go to www.gsa.federalschedules.com/resources/taa-designated-countries/
Kut Gard®
Seamless Knit Spun Dyneema® Glove - Light Weight17-SD200
- Gloves with Spun Dyneema
- 13 Gauge
- White
- Light Weight
- EN Cut Level 3
- SIZES: XS-XL
- PACKED: 6 Dozen/Case
- STOCK TYPE: Stock
Test Method: ASTM F2992-15
New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.
TAA identified products are manufactured or "substantially transformed" in the United States or a TAA "designated country".
For more details go to www.gsa.federalschedules.com/resources/taa-designated-countries/
Kut Gard®
Seamless Knit Spun Dyneema® Glove - Heavy Weight17-SD350
- Gloves with Spun Dyneema
- 7 Gauge
- White
- Heavy Weight
- EN Cut Level 3
- SIZES: XS-XL
- PACKED: 6 Dozen/Case
- STOCK TYPE: Made to Order
Test Method: ASTM F2992-15
New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.
TAA identified products are manufactured or "substantially transformed" in the United States or a TAA "designated country".
For more details go to www.gsa.federalschedules.com/resources/taa-designated-countries/
Kut Gard®
Seamless Knit Spun Dyneema® / Nylon / Nuaramid Glove - Medium Weight17-SDG325
- Seamless Knit with Spun Dyneema/Nylon and Nuaramid
- Elastic Cuff
- 7 Gauge
- Medium Weight
- Gray
- EN Cut Level 3
- SIZES: S-XL
- PACKED: 6 Dozen/Case
- STOCK TYPE: Stock
Test Method: ASTM F2992-15
New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.
TAA identified products are manufactured or "substantially transformed" in the United States or a TAA "designated country".
For more details go to www.gsa.federalschedules.com/resources/taa-designated-countries/
Kut Gard®
Dyneema® Blended Slabbers Glove with Extended Cuff and Double-Sided PVC Dot Grip18-SD385
- Steel Blend with Dyneema Heavy Weight
- Two Side Special Dot Pattern
- EN Cut Level 5
- SIZE: L
- PACKED: 6 Dozen/Case
- STOCK TYPE: Stock
Test Method: ASTM F2992-15
New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.
TAA identified products are manufactured or "substantially transformed" in the United States or a TAA "designated country".
For more details go to www.gsa.federalschedules.com/resources/taa-designated-countries/
WARNING: Cancer - www.P65Warnings.ca.gov
To see what chemicals included in the manufacturing of this product triggered the Prop 65 Warning please go to the Prop 65 Portal.
G-Tek® 3GX®
Seamless Knit Dyneema® Diamond Blended Glove with Polyurethane Coated Flat Grip on Palm & Fingers19-D310
- G-Tek 3GX with Dyneema Diamond Technology
- White Knit with Gray PU Palm & Fingertip Coating
- EN Cut Level 4
- SIZES: XS-2XL
- PACKED: 6 Dozen/Case
- STOCK TYPE: Stock
Test Method: ASTM F2992-15
New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.
Abrasion: 4
Cut (Coupe Test): 4
Tear: 4
Puncture: 2
Cut (TDM-100 Test): C
Impact Protection: X
EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.
Test Method: ASTM D3389-10
The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.
WARNING: Cancer - www.P65Warnings.ca.gov
To see what chemicals included in the manufacturing of this product triggered the Prop 65 Warning please go to the Prop 65 Portal.
G-Tek® 3GX®
Seamless Knit Dyneema® Diamond Blended Glove with Latex Coated Crinkle Grip on Palm & Fingers - Medium Weight19-D313
- G-Tek 3GX
- White Dyneema Diamond
- Blue Latex Crinkle Coated Palm
- EN Cut Level 5
- SIZES: S-XL
- PACKED: 6 Dozen/Case
- STOCK TYPE: Stock
Test Method: ASTM F2992-15
New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.
Abrasion: 3
Cut (Coupe Test): 5
Tear: 4
Puncture: 4
Cut (TDM-100 Test): D
Impact Protection: X
EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.
Test Method: ASTM D3389-10
The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.
G-Tek® 3GX®
Seamless Knit Dyneema® Diamond Blended Glove with Polyurethane Coated Flat Grip on Palm & Fingers19-D318
- G-TEK 3GX
- 18 Gauge Dyneema
- Blue Knit with Black Polyurethane
- SIZES: XS-2XL
- PACKED: 6 Dozen/Case
- STOCK TYPE: Stock
Test Method: ASTM F2992-15
New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.
Abrasion: 3
Cut (Coupe Test): 3
Tear: 4
Puncture: 2
Cut (TDM-100 Test): B
Impact Protection: X
EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.
Test Method: ASTM D3389-10
The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.
WARNING: Cancer - www.P65Warnings.ca.gov
To see what chemicals included in the manufacturing of this product triggered the Prop 65 Warning please go to the Prop 65 Portal.
G-Tek® 3GX®
Seamless Knit Dyneema® Diamond Blended Glove with Polyurethane Coated Flat Grip on Palm & Fingers19-D320
- G-Tek 3GX with Dyneema Diamond Technology
- Gray/Black Knit with Gray PU Palm and Fingertip Coating
- EN Cut Level 4
- SIZES: XS-2XL
- PACKED: 6 Dozen/Case
- STOCK TYPE: Stock
Test Method: ASTM F2992-15
New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.
Abrasion: 4
Cut (Coupe Test): 4
Tear: 4
Puncture: 2
Cut (TDM-100 Test): C
Impact Protection: X
EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.
Test Method: ASTM D3389-10
The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.
WARNING: Cancer - www.P65Warnings.ca.gov
To see what chemicals included in the manufacturing of this product triggered the Prop 65 Warning please go to the Prop 65 Portal.
Great White® 3GX®
Seamless Knit Dyneema® Diamond Blended Glove with Polyurethane Coated Flat Grip on Palm & Fingers19-D322
- Great White 3GX
- White Dyneema Diamond Blended Shell
- 13 Gauge
- Gray Polyurethane Coated Smooth Grip
- Palm & Fingertips
- Knit Wrist
- SIZES: XS-2XL
- PACKED: 6 Dozen/Case
- STOCK TYPE: Stock
Test Method: ASTM F2992-15
New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.
Abrasion: 4
Cut (Coupe Test): 5
Tear: 4
Puncture: 2
Cut (TDM-100 Test): C
Impact Protection: X
EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.
Test Method: ASTM D3389-10
The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.
WARNING: Cancer - www.P65Warnings.ca.gov
To see what chemicals included in the manufacturing of this product triggered the Prop 65 Warning please go to the Prop 65 Portal.
Great White® 3GX®
Seamless Knit Dyneema® Diamond Blended Glove with Polyurethane Coated Flat Grip on Palm & Fingers - Vend-Ready19-D322V
- Great White 3GX
- White Dyneema Diamond Blended Shell
- 13 Gauge
- Gray Polyurethane Coated Smooth Grip
- Palm & Fingertips
- Vend Ready
- SIZES: XS-2XL
- PACKED: 72 Pair/Case
- STOCK TYPE: Stock
Test Method: ASTM F2992-15
New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.
Abrasion: 4
Cut (Coupe Test): 5
Tear: 4
Puncture: 2
Cut (TDM-100 Test): C
Impact Protection: X
EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.
WARNING: Cancer - www.P65Warnings.ca.gov
To see what chemicals included in the manufacturing of this product triggered the Prop 65 Warning please go to the Prop 65 Portal.
G-Tek® 3GX®
Seamless Knit Dyneema® Diamond Blended Glove with Polyurethane Coated Flat Grip on Palm & Fingers19-D324
- G-Tek 3GX
- White Dyneema Diamond
- Black Polyurethane Coated Palm
- EN Cut Level 5
- SIZES: XS-2XL
- PACKED: 6 Dozen/Case
- STOCK TYPE: Stock
Test Method: ASTM F2992-15
New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.
Abrasion: 4
Cut (Coupe Test): 5
Tear: 4
Puncture: 2
Cut (TDM-100 Test): B
Impact Protection: X
EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.
Test Method: ASTM D3389-10
The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.
WARNING: Cancer - www.P65Warnings.ca.gov
To see what chemicals included in the manufacturing of this product triggered the Prop 65 Warning please go to the Prop 65 Portal.
G-Tek® 3GX®
Seamless Knit Dyneema® Diamond Blended Glove with Polyurethane Coated Flat Grip on Palm & Fingers19-D325
- G-Tek 3GX
- White Dyneema Diamond
- White Polyurethane Coated Palm
- EN Cut Level 5
- SIZES: XXS-2XL
- PACKED: 6 Dozen/Case
- STOCK TYPE: Stock
Test Method: ASTM F2992-15
New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.
Abrasion: 4
Cut (Coupe Test): 5
Tear: 4
Puncture: 1
Cut (TDM-100 Test): C
Impact Protection: X
EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.
Test Method: ASTM D3389-10
The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.
WARNING: Cancer - www.P65Warnings.ca.gov
To see what chemicals included in the manufacturing of this product triggered the Prop 65 Warning please go to the Prop 65 Portal.
G-Tek® 3GX®
Seamless Knit Dyneema® Diamond Blended Glove with Polyurethane Coated Flat Grip on Palm & Fingers19-D326
- G-Tek 3GX
- S&P Dyneema Diamond
- Black Polyurethane Coated Palm
- EN Cut Level 4
- SIZES: XS-2XL
- PACKED: 6 Dozen/Case
- STOCK TYPE: Stock
Test Method: ASTM F2992-15
New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.
Abrasion: 4
Cut (Coupe Test): 4
Tear: 4
Puncture: 2
Cut (TDM-100 Test): C
Impact Protection: X
EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.
Test Method: ASTM D3389-10
The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.
WARNING: Cancer - www.P65Warnings.ca.gov
To see what chemicals included in the manufacturing of this product triggered the Prop 65 Warning please go to the Prop 65 Portal.
G-Tek® 3GX®
Seamless Knit Dyneema® Diamond Blended Glove with Polyurethane Coated Flat Grip on Palm & Fingers19-D327
- G-Tek 3GX
- Gray Dyneema Diamond
- Gray Polyurethane Coated Palm
- EN Cut Level 5
- SIZES: XS-2XL
- PACKED: 6 Dozen/Case
- STOCK TYPE: Stock
Test Method: ASTM F2992-15
New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.
Abrasion: 4
Cut (Coupe Test): 5
Tear: 4
Puncture: 2
Cut (TDM-100 Test): C
Impact Protection: X
EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.
Test Method: ASTM D3389-10
The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.
WARNING: Cancer - www.P65Warnings.ca.gov
To see what chemicals included in the manufacturing of this product triggered the Prop 65 Warning please go to the Prop 65 Portal.
G-Tek® 3GX®
Seamless Knit Dyneema® Diamond Blended Glove with Polyurethane Coated Flat Grip on Palm & Fingers19-D330
- G-Tek 3GX with Dyneema Diamond Technology
- White Knit with Gray PU Palm and Fingertip Coating
- EN Cut Level 5
- SIZES: XS-3XL
- PACKED: 6 Dozen/Case
- STOCK TYPE: Stock
Test Method: ASTM F2992-15
New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.
Abrasion: 4
Cut (Coupe Test): 5
Tear: 4
Puncture: 2
Cut (TDM-100 Test): D
Impact Protection: X
EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.
Test Method: ASTM D3389-10
The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.
WARNING: Cancer - www.P65Warnings.ca.gov
To see what chemicals included in the manufacturing of this product triggered the Prop 65 Warning please go to the Prop 65 Portal.
G-Tek® 3GX®
Seamless Knit Dyneema® Diamond Blended Glove with Nitrile Coated Foam Grip on Palm & Fingers19-D334
- Dyneema Diamond Blend Seamless Knit
- 13 Gauge
- Salt & Pepper
- Black Nitrile Foam Grip
- Palm & Fingertips
- Knit Wrist
- SIZES: S-2XL
- PACKED: 6 Dozen/Case
- STOCK TYPE: Stock
Test Method: ASTM F2992-15
New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.
Abrasion: 4
Cut (Coupe Test): 4
Tear: 4
Puncture: 3
Cut (TDM-100 Test): C
Impact Protection: X
EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.
Test Method: ASTM D3389-10
The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.
G-Tek® 3GX®
Seamless Knit Dyneema® Diamond Blended Glove with Nitrile Coated Foam Grip on Palm & Fingers19-D340LG
- Dyneema Diamond Blend Seamless Knit
- 13 Gauge
- Hi-Vis Lime Green
- Black Nitrile Foam Grip
- Palm & Fingertips
- Knit Wrist
- SIZES: XS-2XL
- PACKED: 6 Dozen/Case
- STOCK TYPE: Stock
Test Method: ASTM F2992-15
New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.
Abrasion: 4
Cut (Coupe Test): 5
Tear: 4
Puncture: 4
Cut (TDM-100 Test): D
Impact Protection: X
EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.
Test Method: ASTM D3389-10
The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.
G-Tek® 3GX®
Hi-Vis Seamless Knit Dyneema® Diamond Blended Glove with Nitrile Coated Foam Grip on Palm & Fingers19-D340OR
- Dyneema Diamond Blend Seamless Knit
- 13 Gauge
- Hi-Vis Orange
- Black Nitrile Foam Grip
- Palm & Fingertips
- Knit Wrist
- SIZES: XS-2XL
- PACKED: 6 Dozen/Case
- STOCK TYPE: Stock
Test Method: ASTM F2992-15
New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.
Abrasion: 4
Cut (Coupe Test): 5
Tear: 4
Puncture: 4
Cut (TDM-100 Test): D
Impact Protection: X
EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.
Test Method: ASTM D3389-10
The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.
G-Tek® 3GX®
Seamless Knit Dyneema® Diamond Blended Glove with Nitrile Coated Foam Grip on Palm & Fingers19-D350
- Dyneema Diamond Blend Seamless Knit
- 13 Gauge
- Salt & Pepper
- Gray Nitrile Foam Grip
- Palm & Fingertips
- Knit Wrist
- SIZES: S-XL
- PACKED: 6 Dozen/Case
- STOCK TYPE: Stock
Test Method: ASTM F2992-15
New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.
Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): C
Impact Protection: X
EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.
Test Method: ASTM D3389-10
The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.
G-Tek® 3GX®
Seamless Knit Dyneema® Diamond Blended Glove with Nitrile Coated Foam Grip on Palm, Fingers & Knuckles19-D355
- Dyneema Diamond Blend Seamless Knit
- 13 Gauge
- Salt & Pepper
- Black Nitrile Foam Grip
- Palm Fingers & Kuckles
- Knit Wrist
- SIZES: S-XL
- PACKED: 6 Dozen/Case
- STOCK TYPE: Stock
Test Method: ASTM F2992-15
New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.
Abrasion: 4
Cut (Coupe Test): 4
Tear: 4
Puncture: 3
Cut (TDM-100 Test): C
Impact Protection: X
EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.
Test Method: ASTM D3389-10
The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.
G-Tek® 3GX®
Seamless Knit Dyneema® Diamond Blended Glove with Polyurethane Coated Flat Grip on Palm & Fingers19-D360
- Dyneema Diamond Blend Seamless Knit
- 13 Gauge
- Gray
- Gray Polyurethane Coated Smooth Grip
- Palm & Fingertips
- Knit Wrist
- SIZES: S-XL
- PACKED: 6 Dozen/Case
- STOCK TYPE: Stock
Test Method: ASTM F2992-15
New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.
Abrasion: 4
Cut (Coupe Test): 4
Tear: 4
Puncture: 2
Cut (TDM-100 Test): C
Impact Protection: X
EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.
Test Method: ASTM D3389-10
The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.
WARNING: Cancer - www.P65Warnings.ca.gov
To see what chemicals included in the manufacturing of this product triggered the Prop 65 Warning please go to the Prop 65 Portal.
G-Tek® 3GX® Black
Seamless Knit Dyneema® Diamond Blended Glove with Polyurethane Coated Flat Grip on Palm & Fingers - Touchscreen Compatible19-D526B
- Dyneema Black Diamond Seamless Knit
- 13 Gauge
- Black Polyurethane Grip
- Palm & Fingertips
- Touchscreen Compatible
- Knit Wrist
- SIZES: XS-2XL
- PACKED: 6 Dozen/Case
- STOCK TYPE: Stock
Test Method: ASTM F2992-15
New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.
Abrasion: 4
Cut (Coupe Test): 5
Tear: 4
Puncture: 3
Cut (TDM-100 Test): D
Impact Protection: X
EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.
WARNING: Cancer - www.P65Warnings.ca.gov
To see what chemicals included in the manufacturing of this product triggered the Prop 65 Warning please go to the Prop 65 Portal.
A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.
Click here for more information about Resistive and Capacitive Touchscreens
G-Tek® 3GX® Black
Seamless Knit Dyneema® Diamond Blended Glove with Nitrile Coated Foam Grip on Palm & Fingers - DISCONTINUED19-D534B
- Dyneema Black Diamond Seamless Knit
- 13 Gauge
- Black Nitrile Foam
- Now w/ DISCOUNTED PRICING!
- SIZES: M-XL
- PACKED: 6 Dozen/Case
- STOCK TYPE: Discontinued, inventory may be limited
Test Method: ASTM F2992-15
New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.
Abrasion: 4
Cut (Coupe Test): 5
Tear: 4
Puncture: 3
Cut (TDM-100 Test): C
Impact Protection: X
EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.
Test Method: ASTM D3389-10
The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.
Dynee Mytee™
Seamless Knit HPPE Blended Glove with Polyurethane Coated Flat Grip on Palm & Fingers1PU6000
- HPPE Blend Shell
- Polyurethane Coated Palm
- SIZES: S-2XL
- PACKED: 144 Pair/Case
- STOCK TYPE: Discontinued, inventory may be limited
Abrasion: 4
Cut (Coupe Test): 3
Tear: 4
Puncture: 2
Cut (TDM-100 Test):
Impact Protection:
EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.
WARNING: Cancer - www.P65Warnings.ca.gov
To see what chemicals included in the manufacturing of this product triggered the Prop 65 Warning please go to the Prop 65 Portal.
Kut Gard®
Polyester over Dyneema® / Silica / Stainless Steel Core Seamless Glove - Light Weight22-754
- Silica Fiber with Dyneema and a Polyester Cover
- Light Weight
- Gray
- SIZES: S-XL
- PACKED: 24/Case
- STOCK TYPE: Made to Order
Test Method: ASTM F2992-15
New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.
TAA identified products are manufactured or "substantially transformed" in the United States or a TAA "designated country".
For more details go to www.gsa.federalschedules.com/resources/taa-designated-countries/
Kut Gard®
Polyester over Dyneema® / Silica / Stainless Steel Core Antimicrobial Glove - Heavy Weight22-770
- Silica Fiber with Dyneema and a Polyester Cover
- Heavy Weight
- White
- SIZES: XS-XL
- PACKED: 24/Case
- STOCK TYPE: Stock
Test Method: ASTM F2992-15
New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.
TAA identified products are manufactured or "substantially transformed" in the United States or a TAA "designated country".
For more details go to www.gsa.federalschedules.com/resources/taa-designated-countries/
