LOGIN/ SIGN UP NEW Products Brands Industries Resources About Us Value Proposition PORTAL LOGIN
PRODUCTS CATEGORY
Arm Protection Cold Stress Controlled Environment Electrical Safety Emergency Responder Ergonomics Eye Protection Fall Protection First Aid Foot Protection Hand Protection Head Protection Hearing Protection Heat Stress Protective Clothing Respiratory Protection Warning Beacons Welding Protection Workwear
Arm ProtectionCut Resistant SleeveGeneral Duty SleeveMetal Mesh Sleeves
Cold StressHeated ApparelWarming
Controlled EnvironmentCE Finger CotsCE GlovesCE MasksCE SuppliesReusable Clothing
Electrical SafetyArc AccessoriesArc ClothingArc Protection KitsElectrical Glove ProtectionElectrical Safety AccessoriesInsulating BlanketsInsulating Glove KitInsulating GlovesInsulating Sleeves
Emergency ResponderAccessories FR HoodsFire & Rescue GlovesFire & Rescue GoggleRescue Helmets
ErgonomicsErgonomic SupportsKnee Protection
Eye ProtectionFace ProtectionSafety Eyewear AccessoriesSafety GlassesSafety Goggles
Fall ProtectionTool Tethering
First AidAccessoriesFirst Aid Kit
Foot ProtectionOver-the-Shoe BootsOver-the-Sock BootsSafety Shoes
Hand ProtectionChemical Resistant GlovesCold Protection GlovesCut Resistant GlovesDisposable GlovesExtended Use Disposable GlovesFabric Work GlovesGeneral Purpose Gloves - CoatedGeneral Purpose Gloves - UncoatedHeat Protection GlovesHigh Performance GlovesLeather Drivers GlovesLeather Palm GlovesMetal Mesh GlovesParade & Uniform Gloves
Head ProtectionAccessoriesBump CapsFR HoodsGo-To-Work KitsHard HatsSafety HelmetsWinter Caps & Liners
Hearing ProtectionEar MuffsEar Plugs
Heat StressAbsorptiveEvaporative CoolingHydrationPhase Change CoolingSun Protection
Protective ClothingApronsCold Weather WearCut Resistant WearDisposable ClothingFR ClothingFace CoversHi-Vis ApparelHi-Vis Cold GearHoods & Paint CapsMetal Mesh ClothingRainwear
Respiratory ProtectionCartridgesDisposable MasksReusable Facepieces
Warning BeaconsEflare BeaconsFlash Baton
Welding ProtectionAccessoriesFR ClothingHand Protection
WorkwearWork Apparel
promo-tile

Hand Protection

promo-tile

Specialized PPE for ELECTRIC VEHICLE MANUFACTURING

promo-tile

INTERACTIVE CROSS REFERENCE

promo-tile

Addressing AR/FR Pain Points

promo-tile

Bouton® FogLess® 3Sixty™ Technology

promo-tile

UNRAVELING THE DYNAMICS OF ESD

promo-tile

G-Tek® D3O® Impact Glove Series

promo-tile

JSP Force Typhoon™ 8 Twin Filter Half Masks with PressToCheck™

promo-tile

PIP® Field Installable 4-Point Hard Hat Chin Strap Demo

promo-tile

BioSoft™ Sustainable Bio-Based Ear Plugs

promo-tile

PPE For Emergency Responders

promo-tile

ATA Fiber Technology Strength Meets Comfort

promo-tile

G-Tek® VRX™ ADVANCED PROTECTION

promo-tile

PPE For Emergency Responders

promo-tile

Heated Apparel For Cold Climates

promo-tile

INTERACTIVE CROSS REFERENCE

promo-tile

INTERACTIVE CROSS REFERENCE

promo-tile

Welding Garment Material Performance

promo-tile

Bisley X-Airflow™ Workwear Shirts

promo-tile

ON-SITE PPE ASSESSMENT

promo-tile

3 COMMON TYPES OF COLD STRESS And How You Can Prepare For Them

promo-tile

SUSTAINABLE SOLUTIONS IN PPE

promo-tile

PROTECTIVE SLEEVE BUYERS GUIDE

promo-tile

MULTI-TASK WELDERS GLOVES Offer The Protection And Dexterity Welders Need

promo-tile

ON-SITE PPE ASSESSMENT

promo-tile

SURVIVIVNG THE SUMMER HEAT A Guide to Workplace Safety and Hydration

promo-tile

HALF MASK RESPIRATORS REVOLUTIONARY FORCE TYPHOON™8

promo-tile

SUSTAINABLE SOLUTIONS IN PPE

promo-tile

4 HIDDEN JOBSITE RISKS And How To Avoid Them

promo-tile

Mips®HELMET SAFETY SYSTEM TECHNOLOGY

promo-tile

Bouton OpticalAdvanced Lens Technologies in Safety Eyewear™

promo-tile

What to Consider When Choosing HIGH VISIBILITY MULTI-SEASON WORKWEAR

promo-tile

6 Key Facts to Help Understand ARC FLASH RISKS

promo-tile

ON-SITE PPE ASSESSMENT

promo-tile

Head Protection

promo-tile

REUSABLE VS. DISPOSABLEUsing The Right Garment For The Right Job

promo-tile

Experience Barrier Protection and Flexibility With EXTENDED USE GLOVES

promo-tile

What is Double Hearing Protection And When Would You Need It?

promo-tile

CUSTOM LOGO SERVICES FAST, EASY & PRECISE

promo-tile

SUSTAINABLE SOLUTIONS IN PPE

promo-tile

WELDING SAFETY SELECTOR GUIDE

promo-tile

3SP ONLINE TRAINING

promo-tile

BisleyPREMIUM MULTI-SEASON WORKWEAR

promo-tile

Natural Disaster Relief PPE EXPECT THE UNEXPECTED

promo-tile

MADE-TO-ORDER SLEEVES Custom Options for Enhanced Performance

promo-tile

Enhancing Workplace Safety in the Construction Industry with MULTI-DIRECTIONAL HEAD PROTECTION TECHNOLOGY

promo-tile

ON-SITE PPE ASSESSMENT

promo-tile

THORZT™ RAPID REHYDRATIONFor the Industrial Athlete

promo-tile

Protective Clothing

promo-tile

BioSoft™ THE WORLD'S FIRST SUSTAINABLE BIO-BASED EAR PLUGS

promo-tile

NOVAX ELECTRICAL SAFETYNot All Gloves Are Created Equal

promo-tile

INTERACTIVE CROSS REFERENCE

promo-tile

CONTROLLED ENVIRONMENT SELECTOR GUIDE

promo-tile

3SP ONLINE TRAINING

promo-tile

3SP ONLINE TRAINING

promo-tile

EYE PROTECTION SELECTOR GUIDE

promo-tile

HAND PROTECTION SELECTOR GUIDE

Protect Your Hands

PIP offers the widest range of Seamless Cut-Resistant gloves and sleeves anywhere in the world. Cut-Resistant products are extensively used in industrial, construction and food processing markets. The use of Cut-Resistant gloves and sleeves has increased considerably over the years as we've led with the introductions of new yarns and grips.

SHOWING 1-12 OF 12 ITEMS
1 of 1
FILTERS:
CLEAR ALL
Dyneema Diamond Technology Liner
Pritex Liner
Dyneema Diamond with Polyurethane

G-Tek® 3GX®

Seamless Knit Dyneema® Diamond Blended Glove with Polyurethane Coated Flat Grip on Palm & Fingers

19-D330

  • ANSI Cut Level: A4
  • Liner Material: Dyneema Diamond Technology
  • Gauge: 13
  • Coating: Polyurethane
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: XS-3XL
  • Packed: 6 Dozen/Case
  • Stock Type: Stock
ansi-A4
ANSI Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4542D

EN 388 2016 Results: 4542DX
Abrasion: 4
Cut (Coupe Test): 5
Tear: 4
Puncture: 2
Cut (TDM-100 Test): D
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

End of Life - Recyclable via TerraCycle® Regulated Waste

Reduce waste put into landfill by recycling used PPE through the EasyPak™ recycling program. EasyPak™ containers are a safe and simple way to recycle your PPE.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

California Proposition 65
WARNING: Cancer - www.P65Warnings.ca.gov

To see what chemicals included in the manufacturing of this product triggered the Prop 65 Warning please go to the Prop 65 Portal.

Compare
Hi-Performance Nitrile by ATG CLEARANCE

MaxiCut® Ultra™

Seamless Knit Dyneema® Diamond Blended Glove with Premium Nitrile Coated MicroFoam Grip on Palm & Fingers

44-6745

  • ANSI Cut Level: A3
  • Liner Material: Dyneema Diamond Technology
  • Gauge: 15
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Reinforced Thumb Crotch
  • Sizes: S-XL
  • Packed: 6 Dozen/Case
  • Stock Type: Discontinued, inventory may be limited
ansi-A3
ANSI Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X43C

EN 388 2016 Results: 4X43CX
Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 3
Cut (TDM-100 Test): C
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

End of Life - Recyclable via TerraCycle® Regulated Waste

Reduce waste put into landfill by recycling used PPE through the EasyPak™ recycling program. EasyPak™ containers are a safe and simple way to recycle your PPE.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Compare
Dyneema Diamond with Polyurethane CLEARANCE

G-Tek® 3GX® Black

Seamless Knit Dyneema® Diamond Blended Glove with Polyurethane Coated Flat Grip on Palm & Fingers - Touchscreen Compatible

19-D526B

  • ANSI Cut Level: A4
  • Liner Material: Dyneema Diamond Technology
  • Gauge: 13
  • Coating: Polyurethane
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Seamless Knit, Touchscreen Compatible
  • Sizes: XS-2XL
  • Packed: 6 Dozen/Case
  • Stock Type: Discontinued, inventory may be limited
ansi-A4
ANSI Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4543D

EN 388 2016 Results: 4543DX
Abrasion: 4
Cut (Coupe Test): 5
Tear: 4
Puncture: 3
Cut (TDM-100 Test): D
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

End of Life - Recyclable via TerraCycle® Regulated Waste

Reduce waste put into landfill by recycling used PPE through the EasyPak™ recycling program. EasyPak™ containers are a safe and simple way to recycle your PPE.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

California Proposition 65
WARNING: Cancer - www.P65Warnings.ca.gov

To see what chemicals included in the manufacturing of this product triggered the Prop 65 Warning please go to the Prop 65 Portal.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Compare
Dyneema Diamond with Polyurethane

G-Tek® 3GX®

Seamless Knit Dyneema® Diamond Blended Glove with Polyurethane Coated Flat Grip on Palm & Fingers

19-D325

  • ANSI Cut Level: A3
  • Liner Material: Dyneema Diamond Technology
  • Gauge: 13
  • Coating: Polyurethane
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: XXS-2XL
  • Packed: 6 Dozen/Case
  • Stock Type: Stock
ansi-A3
ANSI Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4541C

EN 388 2016 Results: 4541CX
Abrasion: 4
Cut (Coupe Test): 5
Tear: 4
Puncture: 1
Cut (TDM-100 Test): C
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

End of Life - Recyclable via TerraCycle® Regulated Waste

Reduce waste put into landfill by recycling used PPE through the EasyPak™ recycling program. EasyPak™ containers are a safe and simple way to recycle your PPE.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

California Proposition 65
WARNING: Cancer - www.P65Warnings.ca.gov

To see what chemicals included in the manufacturing of this product triggered the Prop 65 Warning please go to the Prop 65 Portal.

Compare
Hi-Performance Nitrile by ATG CLEARANCE

MaxiFlex® Cut™

Seamless Knit Dyneema® Diamond Blended Glove with Premium Nitrile Coated MicroFoam Grip on Palm & Fingers

34-6743

  • ANSI Cut Level: A2
  • Liner Material: Dyneema Diamond Technology
  • Gauge: 15
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit, Reinforced Thumb Crotch
  • Sizes: S-2XL
  • Packed: 6 Dozen/Case
  • Stock Type: Discontinued, inventory may be limited
ansi-A2
ANSI Cut Level: A2
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X32B

EN 388 2016 Results: 4X32BX
Abrasion: 4
Cut (Coupe Test): X
Tear: 3
Puncture: 2
Cut (TDM-100 Test): B
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

End of Life - Recyclable via TerraCycle® Regulated Waste

Reduce waste put into landfill by recycling used PPE through the EasyPak™ recycling program. EasyPak™ containers are a safe and simple way to recycle your PPE.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Compare
Dyneema Diamond with Polyurethane

G-Tek® 3GX®

Seamless Knit Dyneema® Diamond Blended Glove with Polyurethane Coated Flat Grip on Palm & Fingers

19-D327

  • ANSI Cut Level: A3
  • Liner Material: Dyneema Diamond Technology
  • Gauge: 15
  • Coating: Polyurethane
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: XS-2XL
  • Packed: 6 Dozen/Case
  • Stock Type: Stock
ansi-A3
ANSI Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4542C

EN 388 2016 Results: 4542CX
Abrasion: 4
Cut (Coupe Test): 5
Tear: 4
Puncture: 2
Cut (TDM-100 Test): C
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

End of Life - Recyclable via TerraCycle® Regulated Waste

Reduce waste put into landfill by recycling used PPE through the EasyPak™ recycling program. EasyPak™ containers are a safe and simple way to recycle your PPE.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

California Proposition 65
WARNING: Cancer - www.P65Warnings.ca.gov

To see what chemicals included in the manufacturing of this product triggered the Prop 65 Warning please go to the Prop 65 Portal.

Compare
ECO Series CR Sustainable Fiber Gloves BEST SELLER

Great White® ECO Series™

Seamless Knit Dyneema® Diamond 2.0 Blended Glove with Polyurethane Coated Flat Grip on Palm & Fingers - Vend-Ready

19-D322V

  • ANSI Cut Level: A4
  • Liner Material: Dyneema Diamond Technology
  • Gauge: 13
  • Coating: Polyurethane
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: XS-2XL
  • Packed: 72 Pair/Case
  • Stock Type: Stock
ansi-A4
ANSI Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X42D

EN 388 2016 Results: 4X42DX
Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): D
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

End of Life - Recyclable via TerraCycle® Regulated Waste

Reduce waste put into landfill by recycling used PPE through the EasyPak™ recycling program. EasyPak™ containers are a safe and simple way to recycle your PPE.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

California Proposition 65
WARNING: Cancer - www.P65Warnings.ca.gov

To see what chemicals included in the manufacturing of this product triggered the Prop 65 Warning please go to the Prop 65 Portal.

Compare
Dyneema Diamond with Foam Nitrile CLEARANCE

G-Tek® 3GX® Black

Seamless Knit Dyneema® Diamond Blended Glove with Nitrile Coated Foam Grip on Palm & Fingers

19-D534B

  • ANSI Cut Level: A4
  • Liner Material: Dyneema Diamond Technology
  • Gauge: 13
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Sizes: M-XL
  • Packed: 6 Dozen/Case
  • Stock Type: Closeout, inventory is limited
ansi-A4
ANSI Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4543C

EN 388 2016 Results: 4543CX
Abrasion: 4
Cut (Coupe Test): 5
Tear: 4
Puncture: 3
Cut (TDM-100 Test): C
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

End of Life - Recyclable via TerraCycle® Regulated Waste

Reduce waste put into landfill by recycling used PPE through the EasyPak™ recycling program. EasyPak™ containers are a safe and simple way to recycle your PPE.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Compare
Dyneema Diamond with Foam Nitrile CLEARANCE

G-Tek® 3GX®

Seamless Knit Dyneema® Diamond Blended Glove with Nitrile Coated Foam Grip on Palm & Fingers

19-D340LG

  • ANSI Cut Level: A4
  • Liner Material: Dyneema Diamond Technology
  • Gauge: 13
  • Coating: Nitrile
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: XS-2XL
  • Packed: 6 Dozen/Case
  • Stock Type: Closeout, inventory is limited
ansi-A4
ANSI Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4544D

EN 388 2016 Results: 4544DX
Abrasion: 4
Cut (Coupe Test): 5
Tear: 4
Puncture: 4
Cut (TDM-100 Test): D
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

End of Life - Recyclable via TerraCycle® Regulated Waste

Reduce waste put into landfill by recycling used PPE through the EasyPak™ recycling program. EasyPak™ containers are a safe and simple way to recycle your PPE.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Compare
Dyneema Diamond with Polyurethane

G-Tek® 3GX®

Seamless Knit Dyneema® Diamond Blended Glove with Polyurethane Coated Flat Grip on Palm & Fingers

19-D310

  • ANSI Cut Level: A3
  • Liner Material: Dyneema Diamond Technology
  • Gauge: 13
  • Coating: Polyurethane
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: XS-L
  • Packed: 6 Dozen/Case
  • Stock Type: Discontinued, inventory may be limited
ansi-A3
ANSI Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4442C

EN 388 2016 Results: 4442CX
Abrasion: 4
Cut (Coupe Test): 4
Tear: 4
Puncture: 2
Cut (TDM-100 Test): C
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

End of Life - Recyclable via TerraCycle® Regulated Waste

Reduce waste put into landfill by recycling used PPE through the EasyPak™ recycling program. EasyPak™ containers are a safe and simple way to recycle your PPE.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

California Proposition 65
WARNING: Cancer - www.P65Warnings.ca.gov

To see what chemicals included in the manufacturing of this product triggered the Prop 65 Warning please go to the Prop 65 Portal.

Compare
Dyneema Diamond with Polyurethane CLEARANCE

G-Tek® 3GX®

Seamless Knit Dyneema® Diamond Blended Glove with Polyurethane Coated Flat Grip on Palm & Fingers

19-D360

  • ANSI Cut Level: A3
  • Liner Material: Dyneema Diamond Technology
  • Gauge: 13
  • Coating: Polyurethane
  • Coating Coverage: Palm & Fingers
  • Cuff: Knit Wrist
  • Construction: Coated Seamless Knit
  • Sizes: M-XL
  • Packed: 6 Dozen/Case
  • Stock Type: Closeout, inventory is limited
ansi-A3
ANSI Cut Level: A3
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4442C

EN 388 2016 Results: 4442CX
Abrasion: 4
Cut (Coupe Test): 4
Tear: 4
Puncture: 2
Cut (TDM-100 Test): C
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4
Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

End of Life - Recyclable via TerraCycle® Regulated Waste

Reduce waste put into landfill by recycling used PPE through the EasyPak™ recycling program. EasyPak™ containers are a safe and simple way to recycle your PPE.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

California Proposition 65
WARNING: Cancer - www.P65Warnings.ca.gov

To see what chemicals included in the manufacturing of this product triggered the Prop 65 Warning please go to the Prop 65 Portal.

Compare
Uncoated Polykor Fiber

Kut Gard®

Seamless Knit Pritex™ Blended Antimicrobial Glove - Lightweight

40-235BK

  • ANSI Cut Level: A2
  • Liner Material: Antimicrobial/ Pritex
  • Gauge: 13
  • Weight: Lightweight
  • Coating: Uncoated
  • Cuff: Knit Wrist
  • Construction: Seamless Knit
  • Sizes: XS-2XL
  • Packed: 12 Dozen/Case
  • Stock Type: Stock
    Additional items available for Made-to-Order (MTO) include 40-235BK/XS
ansi-A2
ANSI Cut Level: A2
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

End of Life - Recyclable via TerraCycle® Regulated Waste

Reduce waste put into landfill by recycling used PPE through the EasyPak™ recycling program. EasyPak™ containers are a safe and simple way to recycle your PPE.

Extended Life - Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Compare
SHOWING 1-12 OF 12 ITEMS
1 of 1
pin Rep Finder
Compare ()
Clear All Compare
Okay, Got it.
X

ORDER SAMPLE

X

GET FIELD TRIAL