Protect Your Hands

PIP offers the widest range of Seamless Cut-Resistant gloves and sleeves anywhere in the world. Cut-Resistant products are extensively used in industrial, construction and food processing markets. The use of Cut-Resistant gloves and sleeves has increased considerably over the years as we've led with the introductions of new yarns and grips.

LEARN MORE ABOUT HAND PROTECTION
SHOWING 1-8 OF 8 ITEMS
1 of 1
FILTERS:
CLEAR ALL
PolyKor Xrystal Liner
Nitrile Grip with PolyKor Fiber

G-Tek® PolyKor® Xrystal®

Seamless Knit PolyKor® Xrystal® Blended Glove with Nitrile Coated MicroSurface Grip on Palm & Fingers

16-X310

  • PolyKor Xrystal Blend Seamless Knit Shell
  • 13 Gauge
  • Gray
  • Black Nitrile MicroSurface Coated Grip
  • Palm & Fingertips
  • Silicone Free
  • SIZES: XS-2XL
  • PACKED: 6 Dozen/Case
  • STOCK TYPE: Discontinued, inventory may be limited (16-X310/XL)
ansi-A4
ANSI Cut Level: A4

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4544D

EN 388 2016 Results: 4544DX

Abrasion: 4
Cut (Coupe Test): 5
Tear: 4
Puncture: 4
Cut (TDM-100 Test): D
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

California Proposition 65

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

To see what chemicals included in the manufacturing of this product triggered the Prop 65 Warning please go to the Prop 65 Portal.

Nitrile Foam Grip

G-Tek® PolyKor® Xrystal®

Seamless Knit PolyKor® Xrystal® Blended Glove with Nitrile Coated Foam Grip on Palm & Fingers

16-X320

  • PolyKor Xrystal Blend Seamless Knit Shell
  • 13 Gauge
  • Gray
  • Black Nitrile Foam Coated Grip
  • Palm & Fingertips
  • Silicone Free
  • SIZES: XS-2XL
  • PACKED: 6 Dozen/Case
  • STOCK TYPE:
ansi-A4
ANSI Cut Level: A4

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4543D

EN 388 2016 Results: 4543DX

Abrasion: 4
Cut (Coupe Test): 5
Tear: 4
Puncture: 3
Cut (TDM-100 Test): D
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

California Proposition 65

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

To see what chemicals included in the manufacturing of this product triggered the Prop 65 Warning please go to the Prop 65 Portal.

Polyurethane Grip w/ PolyKor Fiber

G-Tek® PolyKor® Xrystal®

Seamless Knit PolyKor® Xrystal® Blended Glove with Polyurethane Coated Flat Grip on Palm & Fingers

16-X540

  • PolyKor Xrystal Blend Seamless Knit
  • 13 Gauge
  • Salt & Pepper
  • Black Polyurethane Smooth Coated Grip
  • Palm & Fingertips
  • Silicone Free
  • SIZES: XS-2XL
  • PACKED: 6 Dozen/Case
  • STOCK TYPE: Discontinued, inventory may be limited (16-X540/L, 16-X540/M, 16-X540/XL, 16-X540/XXL)
ansi-A4
ANSI Cut Level: A4

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4542D

EN 388 2016 Results: 4542DX

Abrasion: 4
Cut (Coupe Test): 5
Tear: 4
Puncture: 2
Cut (TDM-100 Test): D
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

California Proposition 65

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

To see what chemicals included in the manufacturing of this product triggered the Prop 65 Warning please go to the Prop 65 Portal.

Neofoam Grip with PolyKor Fiber

G-Tek® PolyKor® Xrystal®

Seamless Knit PolyKor® Xrystal® Blended Glove with NeoFoam® Coated Palm & Fingers - Touchscreen Compatible

16-X570

  • PolyKor Xrystal Blend Seamless Knit
  • 13 Gauge
  • Salt & Pepper
  • Black NeoFoam Grip
  • Palm & Fingertips
  • Touchscreen Compatible
  • Silicone Free
  • SIZES: XS-2XL
  • PACKED: 6 Dozen/Case
  • STOCK TYPE: Stock
ansi-A4
ANSI Cut Level: A4

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4542D

EN 388 2016 Results: 4542DX

Abrasion: 4
Cut (Coupe Test): 5
Tear: 4
Puncture: 2
Cut (TDM-100 Test): D
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Neofoam Grip with PolyKor Fiber

G-Tek® PolyKor® Xrystal®

Seamless Knit PolyKor® Xrystal® Blended Glove with NeoFoam® Coated Palm & Fingers and Reinforced Thumb Crotch - Touchscreen Compatible

16-X575

  • PolyKor Xrystal Blend Seamless Knit Shell
  • 13 Gauge
  • Gray
  • Black NeoFoam Coated Grip
  • Touchscreen Compatible
  • Silicone Free
  • SIZES: XS-2XL
  • PACKED: 6 Dozen/Case
  • STOCK TYPE: Discontinued, inventory may be limited (16-X575/XL, 16-X575/XXL)
ansi-A4
ANSI Cut Level: A4

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4542D

EN 388 2016 Results: 4542DX

Abrasion: 4
Cut (Coupe Test): 5
Tear: 4
Puncture: 2
Cut (TDM-100 Test): D
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Neofoam Grip with PolyKor Fiber

G-Tek® PolyKor® Xrystal®

Seamless Knit PolyKor® Xrystal® Blended Glove with NeoFoam® Coated Palm & Fingers - Touchscreen Compatible

16-X580

  • Black PolyKor Blended Shell
  • 13 Gauge
  • Black NeoFoam Coated Grip
  • Touchscreen Compatible
  • ANSI A5
  • SIlicone Free
  • SIZES: S-2XL
  • PACKED: 6 Dozen/Case
  • STOCK TYPE:
ansi-A5
ANSI Cut Level: A5

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X42E

EN 388 2016 Results: 4X42EX

Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): E
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Neofoam Grip with PolyKor Fiber

G-Tek® PolyKor® Xrystal®

Seamless Knit PolyKor® Xrystal® Blended Glove with NeoFoam® Coated Palm & Fingers - Touchscreen Compatible

16-X585

  • Black PolyKor Blended Shell
  • 13 Gauge
  • Black NeoFoam Coated Grip
  • Touchscreen Compatible
  • Reinforced Thumb Crotch
  • Silicone Free
  • SIZES: S-2XL
  • PACKED: 6 Dozen/Case
  • STOCK TYPE: Stock
ansi-A5
ANSI Cut Level: A5

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X42E

EN 388 2016 Results: 4X42EX

Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): E
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Uncoated Polykor Fiber

Kut Gard®

PolyKor® Xrystal® Blended Glove

17-HX200

  • Xrystal/HPPE engineered blend 13GG glove
  • light weight Silicone Free
  • SIZE: L
  • PACKED: 6 Dozen/Case
  • STOCK TYPE: Made to Order
ansi-A3
ANSI Cut Level: A3

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

CUSTOM LOGO

We have a dedicated team that manages all of your logo requests and will help ensure the process runs smoothly from start to finish. If you have any questions along the way, they will be more than happy to assist you.

Experience the Difference

SHOWING 1-8 OF 8 ITEMS
1 of 1
pin Rep Finder
X

ORDER SAMPLE

X

GET FIELD TRIAL