Assurance®: Nitrile Coated Glove with PolyKor® Blend

Assurance®

Nitrile Coated Glove with PolyKor® Blended Liner and MicroSurface Grip on Palm & Fingers - 14"

56-586CR

Color:

Description

Assurance® cut resistant chemicals gloves were designed and developed for those working with chemicals while also requiring a level of cut protection.

Nitrile polymer provides excellent grip in wet, oily and dry conditions
PolyKor® blended liner is lightweight and provides excellent dexterity, tactile sensitivity, and cut resistance
MicroSurface coatings are infused with thousands of tiny suction cup pockets that create a vacuum effect that dispenses fluids away on contact.
MicroSurface coating provides excellent resistance to liquid permeation.
Tested to EN 374-5:2016 for protection against micro-organisms
Strong protection to punctures and abrasions

Performance Data

EN 374 Results: AJKLMNOPT
Type: AA: MethanolJ: HeptaneK: Sodium Hydroxide 40%L: Sulfuric Acid 96%M: Nitric Acid 65%N: Acetic Acid 99%O: Ammonium Hydroxide 25%P: Hydrogen Peroxide 30%T: Formaldehyde 37%

To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

Cut Level: A4
Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

EN 388 2016 Results: 4X42DX
Abrasion: 4Cut (Coupe Test): XTear: 4Puncture: 2Cut (TDM-100 Test): DImpact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ANSI Abrasion Level: 6
Test Method: ASTM D3884-09

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3884-09 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ANSI Puncture Level: 3
Test Method: ASTM F1342

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

Protective Gloves Against Micro-organisms

The EN ISO 374-5 standard measures the ability of gloves to protect users against bacteria and fungi. Gloves with this marking must pass EN374-2 for leak testing.

SKU & Packaging Information

SKU	Color	Size	UPC	Stock Type
56-586CR/S	Gray	S	616314426506	STOCK
56-586CR/M	Gray	M	616314426520	STOCK
56-586CR/L	Gray	L	616314426544	STOCK
56-586CR/XL	Gray	XL	616314426568	STOCK
56-586CR/XXL	Gray	2XL	616314426582	STOCK

Packaging: Bulk Pack
Packed: 6 Dozen/Case
Case Dimensions (in): 16.54 x 12.99 x 12.01
Case Weight (lbs): 18.81
Country of Origin: China

Documents & Downloads

Chemical Name	Level	BTT
Acetic acid, 99%		66 MIN
Ammonium hydroxide, 25%		480 MIN
Formaldehyde, 37%		480 MIN
Formaldehyde, 37%		480 MIN
Hydrogen peroxide, 30%		480 MIN
Methanol		64 MIN
n-Heptane		292 MIN
Nitric acid 65%		94 MIN
Sodium hydroxide, 40%		480 MIN
Sulfuric acid, 96%		61 MIN