Leaders in
Hand Protection
and PPE

BROWSE ALL PRODUCTS
SHOWING 1-36 OF 65 ITEMS
1 of 2
Cut Resistant Gloves

PIP®

Goatskin Leather Palm Glove with Leather Back and Kevlar® Blended Liner - Finger TPR Impact Protection

120-4100

  • Goatskin Leather Palm & Back
  • Reinforced Padded Palm
  • Kevlar Blended Liner
  • Finger Impact TPR
  • Reinforced Thumb Crotch
  • Slip-On Cuff
  • SIZES: M-3XL
  • PACKED: 72 Pair/Case
  • STOCK TYPE: Stock
ansi-A3
ANSI Cut Level: A3

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

3X32C

EN 388 2016 Results: 3X32CX

Abrasion: 3
Cut (Coupe Test): X
Tear: 3
Puncture: 2
Cut (TDM-100 Test): C
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Cut Resistant Gloves

PIP®

Goatskin Leather Palm Glove with Leather Back and Kevlar® Blended Liner - Dorsal TPR Impact Protection

120-4150

  • Goatskin Leather Palm & Back
  • Reinforced Padded Palm
  • Kevlar Blended Liner
  • Dorsal Impact TPR
  • Reinforced Thumb Crotch
  • Slip-On Cuff
  • SIZES: M-3XL
  • PACKED: 72 Pair/Case
  • STOCK TYPE: Stock
ansi-A3
ANSI Cut Level: A3

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

3X33C

EN 388 2016 Results: 3X33CX

Abrasion: 3
Cut (Coupe Test): X
Tear: 3
Puncture: 3
Cut (TDM-100 Test): C
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Hi Performance Glove

PIP®

Goatskin Leather Palm Glove with Leather Back and Finger TPR Impact Protection

120-4200

  • Goatskin Leather Palm & Back
  • Reinforced Padded Palm
  • Reinforced Thumb Crotch
  • Impact Finger TPR
  • Reflective Kunckle Tape
  • Hook & Loop Closure
  • SIZES: M-2XL
  • PACKED: 72 Pair/Case
  • STOCK TYPE: Stock

2112

EN 388 2016 Results: 2112X

Abrasion: 2
Cut (Coupe Test): 1
Tear: 1
Puncture: 2
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Hi Performance Glove

Maximum Safety®

Derrickmen™ Cotton Canvas Palm with Foam Padded Back and TPR Finger Impact Protection

120-4720

  • Cotton Canvas Palm
  • Hi-Vis Foam Padded Back
  • TPR Finger Impact Protection
  • Reflective Knuckle Strap
  • Synthetic Rubber Cuff
  • SIZES: M-2XL
  • PACKED: 72 Pair/Case
  • STOCK TYPE: Stock

1221

EN 388 2016 Results: 1221X

Abrasion: 1
Cut (Coupe Test): 2
Tear: 2
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Hi Performance Glove

Maximum Safety®

Brickyard™ Workman's Glove with Synthetic Leather Palm and TPR Impact Back - Silicone Palm Grip

120-4900

  • Synthetic Leather Palm
  • Neoprene/Nylon Fabric Back
  • TPR Impact Protection
  • Silicone Palm Coated Grip
  • Hook & Loop Wrist Closure
  • SIZES: S-2XL
  • PACKED: 72 Pair/Case
  • STOCK TYPE: Stock

3131

EN 388 2016 Results: 3131X

Abrasion: 3
Cut (Coupe Test): 1
Tear: 3
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Hi Performance Glove

Maximum Safety®

TuffMax3™ Seamless Knit HPPE Blend with Nitrile Grip and TPR Impact Protection

120-5130

  • Seamless Knit HPPE Blend
  • 13G Hi-Vis Green
  • MicroSurface Nitrile Grip
  • Padded Palm
  • Impact Level 2
  • Reinforced Thumb Crotch
  • Hook & Loop Wrist
  • SIZES: S-2XL
  • PACKED: 72 Pair/Case
  • STOCK TYPE: Stock
ansi-A2
ANSI Cut Level: A2

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4343B

EN 388 2016 Results: 4343BX

Abrasion: 4
Cut (Coupe Test): 3
Tear: 4
Puncture: 3
Cut (TDM-100 Test): B
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-impact-2
ANSI Impact Level: 2

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Imapct Series.

Hi Performance Glove

Maximum Safety®

TuffMax5™ Seamless Knit HPPE Blend with Nitrile Grip and TPR Impact Protection

120-5150

  • Seamless Knit HPPE Blend
  • 13G HV Orange
  • MicroSurface Nitrile Grip
  • Padded Palm
  • Impact Level 2
  • Reinforced Thumb Crotch
  • Hook & Loop Wrist
  • SIZES: M-2XL
  • PACKED: 72 Pair/Case
  • STOCK TYPE: Stock
ansi-A4
ANSI Cut Level: A4

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X44D

EN 388 2016 Results: 4X44DP

Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 4
Cut (TDM-100 Test): D
Impact Protection: P

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-impact-2
ANSI Impact Level: 2

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Imapct Series.

Hi Performance Glove

Maximum Safety®

Roustabout™ Synthetic Leather Palm w/ Silicone Grip and Fabric Back - TPR Impact Protection - DISCONTINUED

120-5200

  • Synthetic Leather Palm w/ Silicone Grip
  • HV Yellow Spandex Back
  • TPR Impact Protection
  • Slip-On Cuff
  • Now w/ DISCOUNTED PRICING!
  • SIZES: M-2XL
  • PACKED: 72 Pair/Case
  • STOCK TYPE: Discontinued, inventory may be limited

3132

EN 388 2016 Results: 3132X

Abrasion: 3
Cut (Coupe Test): 1
Tear: 3
Puncture: 2
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Hi Performance Glove

Maximum Safety®

Roustabout™ KVW Synthetic Leather Palm w/ Silicone Grip and Fabric Back - Kevlar Lined & Water Barrier - DISCONTINUED

120-5275

  • Synthetic Leather Palm w/ Silicone Grip
  • HV Yellow Back
  • TPR Impact Protection
  • Kevlar Lining
  • Water Barrier
  • Now w/ DISCOUNTED PRICING!
  • SIZES: M-2XL
  • PACKED: 72 Pair/Case
  • STOCK TYPE: Discontinued, inventory may be limited

3333

EN 388 2016 Results: 3333X

Abrasion: 3
Cut (Coupe Test): 3
Tear: 3
Puncture: 3
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Hi Performance Glove

Maximum Safety®

Roustabout™ II Synthetic Leather Palm w/ Silicone Grip and Fabric Back - TPR Impact Protection - DISCONTINUED

120-5300

  • Synthetic Leather Palm w/ Silicone Grip
  • Hi-Vis Orange Spandex Back
  • TPR Impact Protection
  • Slip-On Cuff
  • Now w/ DISCOUNTED PRICING!
  • SIZES: M-2XL
  • PACKED: 72 Pair/Case
  • STOCK TYPE: Discontinued, inventory may be limited

3132

EN 388 2016 Results: 3132X

Abrasion: 3
Cut (Coupe Test): 1
Tear: 3
Puncture: 2
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Hi Performance Glove

Maximum Safety®

MOG™ Synthetic Leather Palm with Fabric Back - TPR Impact Protection

120-5900

  • Synthetic Leather Palm w/ Reinforcements
  • Hi-Vis Orange Spandex Back
  • TPR Impact Level 1
  • Hook & Loop Wrist Closure
  • SIZES: M-3XL
  • PACKED: 72 Pair/Case
  • STOCK TYPE: Stock

3111

EN 388 2016 Results: 3111X

Abrasion: 3
Cut (Coupe Test): 1
Tear: 1
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-impact-1
ANSI Impact Level: 1

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Imapct Series.

Hi Performance Glove NEW

Boss®

Premium Pigskin Padded Leather Palm with Mesh Fabric Back and TPR Impact Protection

120-MF1360T

  • Framer Style
  • Brown Mesh Fabric Back w/ Impact TPR
  • Premium Pigskin Leather Palm with EVA Padding
  • Hook & Loop Wrist Strap
  • SIZES: S-2XL
  • PACKED: 72 Pair/Case
  • STOCK TYPE: Stock

3122

EN 388 2016 Results: 3122X

Abrasion: 3
Cut (Coupe Test): 1
Tear: 2
Puncture: 2
Cut (TDM-100 Test): X
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Hi Performance Glove BEST SELLER

Boss®

Green Corded Cotton Palm and Spandex Back – TPR Impact Protection

120-MP2100

  • Green Corded Cotton Palm
  • Spandex Back
  • Hi-Vis Green L2 Impact TPR
  • PVC Reinforced Thumb Crotch
  • Elastic Cuff w/ Hook & Loop Closure
  • SIZES: M-3XL
  • PACKED: 72 Pair/Case
  • STOCK TYPE: Stock
ansi-A2
ANSI Cut Level: A2

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

1X21B

EN 388 2016 Results: 1X21BP

Abrasion: 1
Cut (Coupe Test): X
Tear: 2
Puncture: 1
Cut (TDM-100 Test): B
Impact Protection: P

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-impact-2
ANSI Impact Level: 2

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Imapct Series.

Hi Performance Glove BEST SELLER

Boss®

Synthetic Leather Palm with PVC Dotted Grip and Spandex Back - TPR Impact Protection

120-MP2110

  • Microfiber Palm w/ Orange PVC Dot Grip
  • Spandex Back
  • Orange L2 Impact TPR
  • Reinforced Thumb Crotch
  • Neoprene Slip-On Cuff w/ ID Pull Tab
  • SIZES: M-3XL
  • PACKED: 72 Pair/Case
  • STOCK TYPE: Stock
ansi-A2
ANSI Cut Level: A2

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X22B

EN 388 2016 Results: 4X22BP

Abrasion: 4
Cut (Coupe Test): X
Tear: 2
Puncture: 2
Cut (TDM-100 Test): B
Impact Protection: P

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ansi-impact-2
ANSI Impact Level: 2

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Imapct Series.

Hi Performance Glove BEST SELLER

Boss®

Red PVC Grip Palm and Spandex Back - TPR Impact Protection

120-MP2120

  • Red PVC Grip Palm
  • Spandex Back
  • Hi-Vis Yellow Level 2 Impact TPR
  • Reinforced Thumb Crotch
  • Neoprene Slip-On Cuff w/ ID Pull Tab
  • SIZES: M-3XL
  • PACKED: 72 Pair/Case
  • STOCK TYPE: Stock
ansi-A2
ANSI Cut Level: A2

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X43B

EN 388 2016 Results: 4X43BP

Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 3
Cut (TDM-100 Test): B
Impact Protection: P

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ansi-impact-2
ANSI Impact Level: 2

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Imapct Series.

Hi Performance Glove BEST SELLER

Boss®

Synthetic Leather Palm with Red Silicone Grip and Spandex Back – TPR Impact Protection

120-MP2415

  • Microfiber Palm w/ Red Silicone Grip
  • PVC Palm Patch
  • Spandex Back
  • Yellow L2 Impact TPR
  • Reinforced Thumb Crotch
  • Slip-On Cuff w/ ID Tab
  • SIZES: M-3XL
  • PACKED: 72 Pair/Case
  • STOCK TYPE: Stock
ansi-A5
ANSI Cut Level: A5

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

3X43E

EN 388 2016 Results: 3X43EP

Abrasion: 3
Cut (Coupe Test): X
Tear: 4
Puncture: 3
Cut (TDM-100 Test): E
Impact Protection: P

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-6
ANSI Abrasion Level: 6

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ansi-impact-2
ANSI Impact Level: 2

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Imapct Series.

Hi Performance Glove BEST SELLER

Boss®

Red PVC Grip Palm and Spandex Back – TPR Impact Protection

120-MP3120

  • Red PVC Grip Palm
  • Spandex Back
  • Orange L3 Impact TPR w/ D30 Foam
  • Reinforced Thumb Crotch
  • Neoprene Slip-On Cuff w/ ID Pull Tab
  • SIZES: M-3XL
  • PACKED: 72 Pair/Case
  • STOCK TYPE: Stock
ansi-A2
ANSI Cut Level: A2

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X43B

EN 388 2016 Results: 4X43BP

Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 3
Cut (TDM-100 Test): B
Impact Protection: P

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ansi-impact-3
ANSI Impact Level: 3

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Imapct Series.

Cut Resistant Gloves BEST SELLER

G-Tek® PolyKor® X7™

Seamless Knit PolyKor® X7™ Blended Glove with Impact Protection and NeoFoam® Coated Palm & Fingers

16-MP585

  • Seamless Knit
  • 18 Gauge Blue
  • Black NeoFoam Grip
  • Palm & Fingertips
  • L1 TPR Impact Protection
  • Reinforced Thumb Crotch
  • Touchscreen Compatible
  • SIZES: M-2XL
  • PACKED: 36 Pair/Case
  • STOCK TYPE: Stock
ansi-A5
ANSI Cut Level: A5

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X42E

EN 388 2016 Results: 4X42EP

Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): E
Impact Protection: P

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ansi-impact-1
ANSI Impact Level: 1

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Imapct Series.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Cut Resistant Gloves BEST SELLER

G-Tek® PolyKor® X7™

Seamless Knit PolyKor® X7™ Blended Glove with Impact Protection and NeoFoam® Coated Palm & Fingers

16-MP785

  • Seamless Knit
  • 18 Gauge Black
  • Black NeoFoam Grip
  • Palm & Fingertips
  • L1 TPR Impact Protection
  • Reinforced Thumb Crotch
  • Touchscreen Compatible
  • SIZES: M-2XL
  • PACKED: 36 Pair/Case
  • STOCK TYPE: Stock
ansi-A7
ANSI Cut Level: A7

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X42F

EN 388 2016 Results: 4X42FP

Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): F
Impact Protection: P

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ansi-impact-1
ANSI Impact Level: 1

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Imapct Series.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Cut Resistant Gloves BEST SELLER

G-Tek® PolyKor® X7™

Seamless Knit PolyKor® X7™ Blended Glove with Impact Protection and NeoFoam® MicroSurface Grip on Palm & Fingers

16-MP935

  • Seamless Knit
  • 13 Gauge Green
  • Black NeoFoam Microsurface Grip
  • Palm & Fingers
  • L1 TPR Impact Protection
  • Reinforced Thumb Crotch
  • Touchscreen
  • SIZES: M-2XL
  • PACKED: 36 Pair/Case
  • STOCK TYPE: Stock
ansi-A9
ANSI Cut Level: A9

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X43F

EN 388 2016 Results: 4X43FP

Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 3
Cut (TDM-100 Test): F
Impact Protection: P

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ansi-impact-1
ANSI Impact Level: 1

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Imapct Series.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Cut Resistant Gloves NEW

G-Tek® PolyKor®

Seamless Knit PolyKor® Blended Glove with Hi-Vis Impact Protection and Double-Dip Nitrile MicroSurface Grip on Palm & Fingers

16-MPH430HV

  • Seamless Knit
  • 13 Gauge Salt & Pepper
  • Black Nitrile Microsurface Grip
  • Double Dipped
  • Palm & Fingertips
  • L2 Hi-Vis Impact TPR
  • Knit Wrist
  • SIZES: S-2XL
  • PACKED: 36 Pair/Case
  • STOCK TYPE: Stock
ansi-A4
ANSI Cut Level: A4

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X42D

EN 388 2016 Results: 4X42DP

Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): D
Impact Protection: P

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ansi-impact-2
ANSI Impact Level: 2

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Imapct Series.

Cut Resistant Gloves

G-Tek®

Seamless Knit HPPE Blended Glove with Impact Protection and Sandy Nitrile Coated Palm & Fingers

1CF7006FTPR

  • Seamless Knit
  • 13 Gauge Hi-Vis Orange
  • Black Sandy Nitrile Grip
  • Palm & Fingertips
  • TPR Impact Protection
  • Knit Wrist
  • SIZES: M-3XL
  • PACKED: 72 Pair/Case
  • STOCK TYPE: Stock
ansi-A3
ANSI Cut Level: A3

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X44C

EN 388 2016 Results: 4X44CX

Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 4
Cut (TDM-100 Test): C
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Cut Resistant Gloves

Knife Hawwk™

Seamless Knit HPPE Blended Glove with Hi-Vis Impact Protection and Sandy Nitrile Coated Palm & Fingers - DISCONTINUED

1CF7007NTPR

  • Seamless Knit
  • 13G Hi-Vis Yellow
  • Sandy Nitrile Grip
  • Padded Reinforced Thumb Crotch
  • L2 HV TPR Impact Protect
  • Now w/ DISCOUNTED PRICING!
  • SIZES: S-2XL
  • PACKED: 72 Pair/Case
  • STOCK TYPE: Discontinued, inventory may be limited
ansi-A6
ANSI Cut Level: A6

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

3X42F

EN 388 2016 Results: 3X42FP

Abrasion: 3
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): F
Impact Protection: P

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ansi-impact-2
ANSI Impact Level: 2

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Imapct Series.

Hi Performance Glove

Boss®

Miners' Mechanic Synthetic Leather Palm with Foam Padded Back and TPR Finger Impact Protection

1JM400

  • Synthetic Leather Palm
  • Hi-Vis Foam Padded Back
  • Wing Thumb
  • Reflective Knuckle Strap
  • TPR Finger Impact Protection
  • Hook & Loop Wrist Closure
  • SIZES: M-3XL
  • PACKED: 72 Pair/Case
  • STOCK TYPE: Stock
Hi Performance Glove

Boss®

Miners' Mechanic Synthetic Leather Palm with Foam Padded Back and TPR Finger Impact Protection - PVC Patch Grip - DISCONTINUED

1JM500

  • Synthetic Leather Palm w/ PVC Patches
  • Hi-Vis Foam Padded Back
  • TPR Finger Impact Protection
  • Wing Thumb
  • Now w/ DISCOUNTED PRICING!
  • SIZES: M-3XL
  • PACKED: 72 Pair/Case
  • STOCK TYPE: Discontinued, inventory may be limited
Hi Performance Glove

Boss®

Synthetic Leather Palm with PVC Dots and Foam Padded Fabric Back - TRP Impact Protection - DISCONTINUED

1JM600

  • Synthetic Leather Palm w/ PVC Dots
  • Hi-Vis Yellow Foam Padded Back
  • Impact TPR
  • Neoprene Cuff
  • Now w/ DISCOUNTED Pricing!
  • SIZES: M-3XL
  • PACKED: 72 Pair/Case
  • STOCK TYPE: Discontinued, inventory may be limited
ansi-A1
ANSI Cut Level: A1

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4

EN 388 2016 Results: 4

Abrasion:
Cut (Coupe Test):
Tear:
Puncture: 4
Cut (TDM-100 Test):
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Hi Performance Glove

Boss®

Miners' Mechanic Synthetic Leather Palm with PVC Patches, Foam Padded and TPR Finger Protection - Insulated & Waterproof - DISCONTINUED

1JM650

  • Syn Leather Palm w/ PVC Patches
  • Hi-Vis Foam Padded Back
  • TPR Finger Protect
  • Insulated
  • Waterproof
  • H&L Closure
  • Now w/ DISCOUNTED PRICING!
  • SIZES: M-2XL
  • PACKED: 72 Pair/Case
  • STOCK TYPE: Discontinued, inventory may be limited
Hi Performance Glove

Boss®

Synthetic Leather Palm with Fabric Back and TPR Impact Protection - Adjustable Wrist

1JM750AW

  • Synthetic Leather Palm
  • Hi-Vis Yellow Fabric Back
  • TPR Impact Protection
  • Adjustable Neoprene Wrist
  • SIZES: M-3XL
  • PACKED: 72 Pair/Case
  • STOCK TYPE: Stock
ansi-A2
ANSI Cut Level: A2

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4332

EN 388 2016 Results: 4332

Abrasion: 4
Cut (Coupe Test): 3
Tear: 3
Puncture: 2
Cut (TDM-100 Test):
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Hi Performance Glove NEW

Caiman® MAG™

Multi-Activity Glove with Synthetic Leather Silicone Grip Palm and Camouflage Print Fleece Back

2910

  • Synthetic Leather Padded Palm
  • Silicone Grid Pattern Grip
  • Camouflage Print Fleece Back
  • TPR Finger Bump Guards
  • Hook & Loop Closure
  • SIZES: S-2XL
  • PACKED: 120 Pair/Case
  • STOCK TYPE: Stock
Protection From Cold NEW

Caiman®

Synthetic Leather Silicone Grip Palm with Camouflage Print Fleece Back and Heatrac Insulation

2911

  • Synthetic Leather Padded Palm
  • Silicone Grid Grip
  • Camouflage Fleece Back
  • Heatrac Microfiber Insulation
  • TPR Finger Guards
  • Hook & Loop
  • SIZES: M-2XL
  • PACKED: 120 Pair/Case
  • STOCK TYPE: Stock
SeamlessGlove Coated

G-Tek®

Seamless Knit Nylon Glove with Impact Protection and Nitrile Coated Foam Grip on Palm & Fingers

34-MP150

  • Seamless Knit
  • 15 Gauge Black Nylon
  • Nitrile Foam Coating
  • Palm & Fingertips
  • Impact TPR Protection
  • Knit Wrist
  • SIZES: M-2XL
  • PACKED: 36 Pair/Case
  • STOCK TYPE: Stock

4121

EN 388 2016 Results: 4121

Abrasion: 4
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test):
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

SeamlessGlove Coated BEST SELLER

G-Tek®

Seamless Knit Nylon Glove with Impact Protection and Nitrile Coated Foam Grip on Palm & Fingers

34-MP155

  • Seamless Knit
  • 15 Gauge Black Nylon
  • Nitrile Foam Coating
  • Palm & Fingertips
  • L1 Impact TPR Protection
  • Reinforced Thumb Crotch
  • SIZES: M-2XL
  • PACKED: 36 Pair/Case
  • STOCK TYPE: Stock

4121

EN 388 2016 Results: 4121P

Abrasion: 4
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test):
Impact Protection: P

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ansi-impact-1
ANSI Impact Level: 1

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Imapct Series.

Cut Resistant Gloves

G-Tek® PolyKor®

Seamless Knit Polykor Blended Glove with Impact Protection and Polyurethane Coated Palm & Fingers

710HGUB

  • Seamless Knit
  • 10 Gauge Gray
  • Gray Polyurethane Grip
  • Palm & Fingertips
  • L1 TPR Impact Protection
  • Knit Wrist
  • SIZES: S-2XL
  • PACKED: 120 Pair/Case
  • STOCK TYPE: Stock
ansi-A4
ANSI Cut Level: A4

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X42D

EN 388 2016 Results: 4X42DP

Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): D
Impact Protection: P

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ansi-impact-1
ANSI Impact Level: 1

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Imapct Series.

Cut Resistant Gloves

G-Tek®

Seamless Knit HPPE Blended Glove with Hi-Vis Impact Protection and Polyurethane Coated Palm & Fingers

710HGUBHVG

  • Seamless Knit
  • 10 Gauge Gray
  • Gray Polyurethane Grip
  • Palm & Fingertips
  • L1 Hi-Vis TPR Impact Protection
  • Knit Wrist
  • SIZES: XXS-2XL
  • PACKED: 120 Pair/Case
  • STOCK TYPE: Stock
ansi-A4
ANSI Cut Level: A4

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X42D

EN 388 2016 Results: 4X42DP

Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): D
Impact Protection: P

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ansi-impact-1
ANSI Impact Level: 1

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Imapct Series.

Cut Resistant Gloves

Barracuda®

Seamless Knit HPPE Blended Glove with Impact Protection and Polyurethane Coated Palm & Fingers

713HGWUB

  • Seamless Knit
  • 13 Gauge White
  • Gray Polyurethane Grip
  • Palm & Fingertips
  • TPR Impact Protection
  • Knit Wrist
  • SIZES: S-2XL
  • PACKED: 120 Pair/Case
  • STOCK TYPE: Stock
ansi-A2
ANSI Cut Level: A2

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X42B

EN 388 2016 Results: 4X42BX

Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): B
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

California Proposition 65

WARNING: Cancer - www.P65Warnings.ca.gov

To see what chemicals included in the manufacturing of this product triggered the Prop 65 Warning please go to the Prop 65 Portal.

Cut Resistant Gloves

G-Tek®

Seamless Knit HPPE Blended Glove with Impact Protection and Red Nitrile Foam Coated Palm & Fingers

713SNTPRG

  • Seamless Knit
  • 13 Gauge Salt & Pepper
  • Red Nitrile Foam Grip
  • Palm & Fingertips
  • Hi-Vis TPR Impact Protection
  • Knit Wrist
  • SIZES: S-2XL
  • PACKED: 144 Pair/Case
  • STOCK TYPE: Stock
    Discontinued, inventory may be limited (713SNTPRG/M)
ansi-A2
ANSI Cut Level: A2

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4343B

EN 388 2016 Results: 4343BX

Abrasion: 4
Cut (Coupe Test): 3
Tear: 4
Puncture: 3
Cut (TDM-100 Test): B
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

SHOWING 1-36 OF 65 ITEMS
1 of 2
pin Rep Finder
X

ORDER SAMPLE

X

GET FIELD TRIAL