boss-logo

Made for WorkingTM

Crafted from the most advanced materials and engineered to provide maximum protection and productivity for workers in tough Industrial environments. Boss® high-performance gloves deliver heavy-duty protection and offer the best fit, grip and function.

SHOWING 1-36 OF 159 ITEMS
1 of 5
Hi Performance Glove

Boss® Xtreme

AR/FR Top Grain Goatskin Leather Drivers Glove with DuPont™ Kevlar® Lining - Straight Thumb

09-K3750

  • Goatskin Leather Drivers
  • Premium Grade
  • Straight Thumb
  • 13G Kevlar Cut Lining
  • ATPV 37 cal/cm2
  • Chromium VI Free
  • Flame Resistant
  • Slip-On
  • SIZES: S-3XL
  • PACKED: 6 Dozen/Case
  • STOCK TYPE: Stock
ansi-A2
ANSI Cut Level: A2

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

3X22B

EN 388 2016 Results: 3X22BX

Abrasion: 3
Cut (Coupe Test): X
Tear: 2
Puncture: 2
Cut (TDM-100 Test): B
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ATPV 37Cal/cm2

The NFPA has identified the various FR hazardous risk category levels, which range from PPE 1 (which is low risk and requires AR clothing with a minimum arc rating of 4), up to PPE 4 (which is high risk and requires AR clothing with a minimum arc rating of 40). Each level, 1-4, is rated at a certain amount of flame resistance measured in cal/cm2.

Hi Performance Glove

Boss® Xtreme

AR Rated Top Grain Goatskin Leather Drivers Glove with Para-Aramid Lining - Keystone Thumb

09-LC533AR

  • Goatskin Leather Drivers
  • Premium Grade
  • Keystone Thumb
  • 13G Para- Aramid Cut Lining
  • ATPV 44 cal/cm2
  • Chromium VI Free
  • Slip-On Cuff
  • SIZES: M-3XL
  • PACKED: 6 Dozen/Case
  • STOCK TYPE: Stock
ansi-A5
ANSI Cut Level: A5

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

2X32E

EN 388 2016 Results: 2X32E

Abrasion: 2
Cut (Coupe Test): X
Tear: 3
Puncture: 2
Cut (TDM-100 Test): E
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

44Cal/cm2

The NFPA has identified the various FR hazardous risk category levels, which range from PPE 1 (which is low risk and requires AR clothing with a minimum arc rating of 4), up to PPE 4 (which is high risk and requires AR clothing with a minimum arc rating of 40). Each level, 1-4, is rated at a certain amount of flame resistance measured in cal/cm2.

Cut Resistant Gloves NEW

Boss®

Economy Top Grain Goatskin Leather Drivers Glove with HPPE Blend Lining and Hi-Vis Impact Protection

09-LC571MP

  • Goatskin Leather Drivers
  • Economy Grade
  • 10G HPPE Blend Cut Liner
  • ANSI L2 TPR Impact Protection
  • Keystone Thumb
  • Aramid Stitch
  • Slip-On Cuff
  • SIZES: M-3XL
  • PACKED: 36 Pair/Case
  • STOCK TYPE: Stock
ansi-A5
ANSI Cut Level: A5

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X43E

EN 388 2016 Results: 4X43EP

Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 3
Cut (TDM-100 Test): E
Impact Protection: P

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ANSI PUNCTURE LEVEL: 3

The ANSI/ISEA 105-2016 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.

ansi-impact-2
ANSI Impact Level: 2

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Imapct Series.

Hi Performance Glove NEW

Boss®

Synthetic Microfiber Palm with Mesh Fabric Back and Para-Aramid Cut Lining

120-MC1225T

  • Cut Style
  • Gray Mesh Fabric Back
  • Black Microfiber Palm
  • A5 Cut Lining
  • Touchscreen Capability
  • Hook & Loop Wrist Closure
  • SIZES: S-2XL
  • PACKED: 72 Pair/Case
  • STOCK TYPE: Stock
ansi-A5
ANSI Cut Level: A5

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

3X22E

EN 388 2016 Results: 3X22E

Abrasion: 3
Cut (Coupe Test): X
Tear: 2
Puncture: 2
Cut (TDM-100 Test): E
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Hi Performance Glove NEW

Boss®

Premium Pigskin Leather Palm with Mesh Fabric Back and Para-Aramid Cut Lining

120-MC1325T

  • Cut Style
  • Gray Mesh Fabric Back
  • Brown Pigskin Palm
  • A5 Cut Lining
  • Touchscreen Index Finger
  • Hook & Loop Wrist Closure
  • SIZES: S-2XL
  • PACKED: 72 Pair/Case
  • STOCK TYPE: Stock
ansi-A5
ANSI Cut Level: A5

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

3X23E

EN 388 2016 Results: 3X23E

Abrasion: 3
Cut (Coupe Test): X
Tear: 2
Puncture: 3
Cut (TDM-100 Test): E
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-6
ANSI Abrasion Level: 6

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Hi Performance Glove NEW

Boss®

Premium Pigskin Padded Leather Palm with Mesh Fabric Back and TPR Impact Protection

120-MF1360T

  • Framer Style
  • Brown Mesh Fabric Back w/ Impact TPR
  • Premium Pigskin Leather Palm with EVA Padding
  • Hook & Loop Wrist Strap
  • SIZES: S-2XL
  • PACKED: 72 Pair/Case
  • STOCK TYPE: Stock

3122

EN 388 2016 Results: 3122X

Abrasion: 3
Cut (Coupe Test): 1
Tear: 2
Puncture: 2
Cut (TDM-100 Test): X
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Hi Performance Glove NEW

Boss®

Synthetic Microfiber Palm with Silicone Grip and Mesh Fabric Back

120-MG1220T

  • Grip Style
  • Gray Mesh Fabric Back w/ Black
  • Microfiber Palm w/ Silicone Grip
  • Touchscreen Index Finger
  • Hook & Loop Closure
  • SIZES: S-2XL
  • PACKED: 72 Pair/Case
  • STOCK TYPE: Stock

4121

EN 388 2016 Results: 4121X

Abrasion: 4
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test): X
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Hi Performance Glove NEW

Boss®

Synthetic Microfiber Palm with Silicone Grip and Hi-Vis Mesh Fabric Back

120-MG1240T

  • Grip Style
  • Hi-Vis Orange Mesh Back
  • Black Microfiber Palm w/ Silicone Pattern Grip
  • Touchscreen Index Finger
  • Hook & Loop
  • SIZES: S-2XL
  • PACKED: 72 Pair/Case
  • STOCK TYPE: Stock

4121

EN 388 2016 Results: 4121X

Abrasion: 4
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test): X
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Hi Performance Glove NEW

Boss®

Premium Pigskin Leather Palm with Mesh Fabric Back

120-ML1350T

  • Leather Style
  • Red Mesh Fabric Back
  • Premium Pigskin Palm
  • Touchscreen Index Finger
  • Hook & Loop Closure
  • SIZES: S-2XL
  • PACKED: 72 Pair/Case
  • STOCK TYPE: Stock

3122

EN 388 2016 Results: 3122X

Abrasion: 3
Cut (Coupe Test): 1
Tear: 2
Puncture: 2
Cut (TDM-100 Test): X
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Hi Performance Glove NEW

Boss®

Premium Pigskin Leather Palm with Mesh Fabric Back

120-ML1360T

  • Leather Style
  • Brown Mesh Fabric Back
  • Brown Premium Pigskin Palm
  • Touchscreen Index Finger
  • Hook & Loop Closure
  • SIZES: S-2XL
  • PACKED: 72 Pair/Case
  • STOCK TYPE: Stock

3122

EN 388 2016 Results: 3122X

Abrasion: 3
Cut (Coupe Test): 1
Tear: 2
Puncture: 2
Cut (TDM-100 Test): X
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Hi Performance Glove BEST SELLER

Boss®

Green Corded Cotton Palm and Spandex Back – TPR Impact Protection

120-MP2100

  • Green Corded Cotton Palm
  • Spandex Back
  • Hi-Vis Green L2 Impact TPR
  • PVC Reinforced Thumb Crotch
  • Elastic Cuff w/ Hook & Loop Closure
  • SIZES: M-3XL
  • PACKED: 72 Pair/Case
  • STOCK TYPE: Stock
ansi-A2
ANSI Cut Level: A2

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

1X21B

EN 388 2016 Results: 1X21BP

Abrasion: 1
Cut (Coupe Test): X
Tear: 2
Puncture: 1
Cut (TDM-100 Test): B
Impact Protection: P

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-impact-2
ANSI Impact Level: 2

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Imapct Series.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Hi Performance Glove BEST SELLER

Boss®

Synthetic Leather Palm with PVC Dotted Grip and Spandex Back - TPR Impact Protection

120-MP2110

  • Microfiber Palm w/ Orange PVC Dot Grip
  • Spandex Back
  • Orange L2 Impact TPR
  • Reinforced Thumb Crotch
  • Neoprene Slip-On Cuff w/ ID Pull Tab
  • SIZES: M-3XL
  • PACKED: 72 Pair/Case
  • STOCK TYPE: Stock
ansi-A2
ANSI Cut Level: A2

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X22B

EN 388 2016 Results: 4X22BP

Abrasion: 4
Cut (Coupe Test): X
Tear: 2
Puncture: 2
Cut (TDM-100 Test): B
Impact Protection: P

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ansi-impact-2
ANSI Impact Level: 2

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Imapct Series.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Hi Performance Glove BEST SELLER

Boss®

Red PVC Grip Palm and Spandex Back - TPR Impact Protection

120-MP2120

  • Red PVC Grip Palm
  • Spandex Back
  • Hi-Vis Yellow Level 2 Impact TPR
  • Reinforced Thumb Crotch
  • Neoprene Slip-On Cuff w/ ID Pull Tab
  • SIZES: M-3XL
  • PACKED: 72 Pair/Case
  • STOCK TYPE: Stock
ansi-A2
ANSI Cut Level: A2

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X43B

EN 388 2016 Results: 4X43BP

Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 3
Cut (TDM-100 Test): B
Impact Protection: P

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ansi-impact-2
ANSI Impact Level: 2

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Imapct Series.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Hi Performance Glove BEST SELLER

Boss®

Synthetic Leather Palm with Red Silicone Grip and Spandex Back – TPR Impact Protection

120-MP2415

  • Microfiber Palm w/ Red Silicone Grip
  • PVC Palm Patch
  • Spandex Back
  • Yellow L2 Impact TPR
  • Reinforced Thumb Crotch
  • Slip-On Cuff w/ ID Tab
  • SIZES: M-3XL
  • PACKED: 72 Pair/Case
  • STOCK TYPE: Stock
ansi-A5
ANSI Cut Level: A5

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

3X43E

EN 388 2016 Results: 3X43EP

Abrasion: 3
Cut (Coupe Test): X
Tear: 4
Puncture: 3
Cut (TDM-100 Test): E
Impact Protection: P

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-6
ANSI Abrasion Level: 6

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ansi-impact-2
ANSI Impact Level: 2

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Imapct Series.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Hi Performance Glove BEST SELLER

Boss®

Red PVC Grip Palm and Spandex Back – TPR Impact Protection

120-MP3120

  • Red PVC Grip Palm
  • Spandex Back
  • Orange L3 Impact TPR w/ D3O Foam
  • Reinforced Thumb Crotch
  • Neoprene Slip-On Cuff w/ ID Pull Tab
  • SIZES: M-3XL
  • PACKED: 72 Pair/Case
  • STOCK TYPE: Stock
ansi-A2
ANSI Cut Level: A2

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X43B

EN 388 2016 Results: 4X43BP

Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 3
Cut (TDM-100 Test): B
Impact Protection: P

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ansi-impact-3
ANSI Impact Level: 3

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Imapct Series.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Hi Performance Glove NEW

Boss®

Synthetic Microfiber Palm with Mesh Fabric Back

120-MU1210T

  • Utility Style
  • Black Mesh Fabric Back w/ Red
  • Microfiber Palm
  • Touchscreen Capability
  • Hook & Loop Wrist Closure
  • SIZES: S-2XL
  • PACKED: 72 Pair/Case
  • STOCK TYPE: Stock

3121

EN 388 2016 Results: 3121X

Abrasion: 3
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test): X
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Hi Performance Glove NEW

Boss®

Synthetic Microfiber Palm with Mesh Fabric Back

120-MU1220T

  • Utility Style
  • Gray Mesh Fabric Back w/ Black
  • Black Microfiber Palm
  • Touchscreen Compatible
  • Hook & Loop Closure
  • SIZES: S-2XL
  • PACKED: 72 Pair/Case
  • STOCK TYPE: Stock

3121

EN 388 2016 Results: 3121X

Abrasion: 3
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test): X
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Hi Performance Glove NEW

Boss®

Synthetic Microfiber Palm with Hi-Vis Mesh Fabric Back

120-MV1230T

  • Hi-Vis Style
  • HV Yellow Mesh Fabric Back w/ Black
  • Black Microfiber Palm
  • Touchscreen Compatible
  • Hook & Loop Closure
  • SIZES: S-2XL
  • PACKED: 72 Pair/Case
  • STOCK TYPE: Stock

3121

EN 388 2016 Results: 3121X

Abrasion: 3
Cut (Coupe Test): 1
Tear: 2
Puncture: 1
Cut (TDM-100 Test): X
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Touchscreen Compatible

A common misconception is that touchscreens work based on heat from fingers. It's not heat that generates touchscreen functionality, instead, most screens work either on finger pressure applied or electrical field disruption. Basically, this means there are two main types of touchscreen technologies, Resistive and Capacitive.

Click here for more information about Resistive and Capacitive Touchscreens

Fabric Work Gloves

Boss®

Premium Grade Chore Glove with Single Layer Palm, Single Layer Back and Nap-Out Finish - Knit Wrist

1BC0313

  • Premium Grade
  • Heavyweight Green Cotton Blend
  • Single Layer Palm
  • Single Ply Back
  • Straight Thumb
  • Green Knit Wrist
  • SIZES: L-XL
  • PACKED: 72 Pair/Case
  • STOCK TYPE: Stock
End of Life – Recyclable via Terracycle® Program

Whether it’s earplugs, gloves, safety eyewear or other recyclable PPE used in a manufacturing facility or jobsite, PIP®, in collaboration with TerraCycle® provides an easy and convenient way of collecting used PPE to help reduce the amount of waste that ends up in landfills. Contaminated PPE cannot be recycled. Learn more.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Fabric Work Gloves

Boss®

Premium Grade Chore Glove with Single Layer Palm, Single Layer Back and Nap-Out Finish - Knit Wrist

1BC0341

  • Premium Grade
  • Heavyweight Cotton Blend
  • Single Layer Palm
  • Single Ply Back
  • Wing Thumb
  • Lined & Bonded w/ Rubberized Adhesive
  • Knit Wrist
  • SIZE: L
  • PACKED: 72 Pair/Case
  • STOCK TYPE: Stock
End of Life – Recyclable via Terracycle® Program

Whether it’s earplugs, gloves, safety eyewear or other recyclable PPE used in a manufacturing facility or jobsite, PIP®, in collaboration with TerraCycle® provides an easy and convenient way of collecting used PPE to help reduce the amount of waste that ends up in landfills. Contaminated PPE cannot be recycled. Learn more.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Fabric Work Gloves

Boss®

Premium Grade Chore Glove with Double Layer Palm, Cotton Back and Nap-Out Finish - Rubberized Gauntlet Cuff

1BC0666

  • Premium Grade
  • Two Layer Gold Palm
  • Striped Cotton Back
  • Straight Thumb
  • Rubberized Gauntlet Cuff
  • SIZES: L-XL
  • PACKED: 72 Pair/Case
  • STOCK TYPE: Stock
End of Life – Recyclable via Terracycle® Program

Whether it’s earplugs, gloves, safety eyewear or other recyclable PPE used in a manufacturing facility or jobsite, PIP®, in collaboration with TerraCycle® provides an easy and convenient way of collecting used PPE to help reduce the amount of waste that ends up in landfills. Contaminated PPE cannot be recycled. Learn more.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Fabric Work Gloves

Boss®

Premium Grade Chore Glove with Double Layer Palm, Cotton Back and Nap-Out Finish - Rubberized Gauntlet Cuff

1BC21701J

  • Premium Grade
  • Two Layer Natural Palm
  • Natural Cotton Back
  • Straight Thumb
  • Rubberized Gauntlet Cuff
  • SIZE: XL
  • PACKED: 72 Pair/Case
  • STOCK TYPE: Stock
End of Life – Recyclable via Terracycle® Program

Whether it’s earplugs, gloves, safety eyewear or other recyclable PPE used in a manufacturing facility or jobsite, PIP®, in collaboration with TerraCycle® provides an easy and convenient way of collecting used PPE to help reduce the amount of waste that ends up in landfills. Contaminated PPE cannot be recycled. Learn more.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Fabric Work Gloves

Boss®

Regular Grade Chore Glove with Double Layer Palm, Cotton Back and Nap-Out Finish - Rubberized Safety Cuff

1BC28372

  • Regular Grade
  • Two Layer Gold Palm
  • Single Ply White Cotton Back
  • Straight Thumb
  • Rubberized Safety Cuff
  • SIZE: L
  • PACKED: 72 Pair/Case
  • STOCK TYPE: Stock
End of Life – Recyclable via Terracycle® Program

Whether it’s earplugs, gloves, safety eyewear or other recyclable PPE used in a manufacturing facility or jobsite, PIP®, in collaboration with TerraCycle® provides an easy and convenient way of collecting used PPE to help reduce the amount of waste that ends up in landfills. Contaminated PPE cannot be recycled. Learn more.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Fabric Work Gloves

Boss®

Premium Grade Chore Glove with Double Layer Palm, Cotton Back and Nap-Out Finish - Plasticized Gauntlet Cuff

1BC28571

  • Premium Grade
  • Two Layer Gold Palm
  • Natural Cotton Back
  • Straight Thumb
  • Plasticized Gauntlet Cuff
  • SIZE: L
  • PACKED: 72 Pair/Case
  • STOCK TYPE: Stock
End of Life – Recyclable via Terracycle® Program

Whether it’s earplugs, gloves, safety eyewear or other recyclable PPE used in a manufacturing facility or jobsite, PIP®, in collaboration with TerraCycle® provides an easy and convenient way of collecting used PPE to help reduce the amount of waste that ends up in landfills. Contaminated PPE cannot be recycled. Learn more.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Protection From Heat

Boss®

Heavy Weight Cotton Hot Mill Glove with Two-Layers of Rayon Lining - 30 oz

1BC40721

  • 2-PLY HOT MILL
  • RUBBERIZED GAUNTLET CUFF
  • SIZE: L
  • PACKED: 72 Pair/Case
  • STOCK TYPE: Stock
End of Life – Recyclable via Terracycle® Program

Whether it’s earplugs, gloves, safety eyewear or other recyclable PPE used in a manufacturing facility or jobsite, PIP®, in collaboration with TerraCycle® provides an easy and convenient way of collecting used PPE to help reduce the amount of waste that ends up in landfills. Contaminated PPE cannot be recycled. Learn more.

California Proposition 65

WARNING: Reproductive Harm - www.P65Warnings.ca.gov

To see what chemicals included in the manufacturing of this product triggered the Prop 65 Warning please go to the Prop 65 Portal.

Protection From Heat

Hot Wing™

Extra Heavy Weight Cotton Hotmill Glove with Felt Lining - Band Top

1BC42128A

  • 12 Oz. 3-Ply 100% Cotton Boss Cord™ Palm Wing Thumb
  • CLute CUte Design
  • SIZES: S-XL
  • PACKED: 72 Pair/Case
  • STOCK TYPE: Stock
End of Life – Recyclable via Terracycle® Program

Whether it’s earplugs, gloves, safety eyewear or other recyclable PPE used in a manufacturing facility or jobsite, PIP®, in collaboration with TerraCycle® provides an easy and convenient way of collecting used PPE to help reduce the amount of waste that ends up in landfills. Contaminated PPE cannot be recycled. Learn more.

CUSTOM LOGO

We have a dedicated team that manages all of your logo requests and will help ensure the process runs smoothly from start to finish. If you have any questions along the way, they will be more than happy to assist you.

Experience the Difference

Protection From Heat

Hot Wing™

Extra Heavy Weight Cotton Hotmill Glove with Felt Lining - Band Top - No Print

1BC42128ANP

  • 12 Oz. 3-Ply 100% Cotton Boss Cord™ Palm Band Top Cuff
  • Wing Thumb
  • No Logo
  • SIZE: L
  • PACKED: 72 Pair/Case
  • STOCK TYPE: Stock
End of Life – Recyclable via Terracycle® Program

Whether it’s earplugs, gloves, safety eyewear or other recyclable PPE used in a manufacturing facility or jobsite, PIP®, in collaboration with TerraCycle® provides an easy and convenient way of collecting used PPE to help reduce the amount of waste that ends up in landfills. Contaminated PPE cannot be recycled. Learn more.

Protection From Heat

Boss®

Canvas/Rayon Hot Mill Nap-In W Band Top Cuff Straight Thumb

1BC42200

  • Band Top Cuff
  • Clute Cut Design
  • Straight Thumb 10 Oz. 1-Ply Canvas/1-Ply Rayon
  • 100% Cotton Nap-In Palm
  • SIZE: L
  • PACKED: 72 Pair/Case
  • STOCK TYPE: Stock
End of Life – Recyclable via Terracycle® Program

Whether it’s earplugs, gloves, safety eyewear or other recyclable PPE used in a manufacturing facility or jobsite, PIP®, in collaboration with TerraCycle® provides an easy and convenient way of collecting used PPE to help reduce the amount of waste that ends up in landfills. Contaminated PPE cannot be recycled. Learn more.

Protection From Heat

Boss®

2-Ply Hot Mill Nap-Out Double Stitched Cuff Knuckle Strap

1BC42735

  • Clute Cut Design
  • Double Stitched Cuff
  • Knuckle Strap 12 Oz. 2-Ply 100% Cotton Nap-Out Palm
  • SIZE: L
  • PACKED: 72 Pair/Case
  • STOCK TYPE: Stock
End of Life – Recyclable via Terracycle® Program

Whether it’s earplugs, gloves, safety eyewear or other recyclable PPE used in a manufacturing facility or jobsite, PIP®, in collaboration with TerraCycle® provides an easy and convenient way of collecting used PPE to help reduce the amount of waste that ends up in landfills. Contaminated PPE cannot be recycled. Learn more.

Protection From Heat

Boss®

2-Ply Hot Mill Nap-Out Green W Gauntlet Cuff Straight Thumb

1BC43300

  • Clute Cut Design
  • Gauntlet Cuff
  • Straight Thumb 18 Oz. 2-Ply Green Quilted 100% Cotton Flannel
  • SIZE: L
  • PACKED: 72 Pair/Case
  • STOCK TYPE: Stock
End of Life – Recyclable via Terracycle® Program

Whether it’s earplugs, gloves, safety eyewear or other recyclable PPE used in a manufacturing facility or jobsite, PIP®, in collaboration with TerraCycle® provides an easy and convenient way of collecting used PPE to help reduce the amount of waste that ends up in landfills. Contaminated PPE cannot be recycled. Learn more.

Fabric Work Gloves

Boss®

Regular Grade Chore Glove with Double Layer Palm, Cotton Back and Nap-Out Finish - Rubberized Safety Cuff

1BC5510

  • Regular Grade
  • Two Layer Gold Palm
  • Striped Cotton Back
  • Straight Thumb
  • Rubberized Safety Cuff
  • SIZES: L-XL
  • PACKED: 72 Pair/Case
  • STOCK TYPE: Stock
End of Life – Recyclable via Terracycle® Program

Whether it’s earplugs, gloves, safety eyewear or other recyclable PPE used in a manufacturing facility or jobsite, PIP®, in collaboration with TerraCycle® provides an easy and convenient way of collecting used PPE to help reduce the amount of waste that ends up in landfills. Contaminated PPE cannot be recycled. Learn more.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

California Proposition 65

WARNING: Reproductive Harm - www.P65Warnings.ca.gov

To see what chemicals included in the manufacturing of this product triggered the Prop 65 Warning please go to the Prop 65 Portal.

Leather Drivers

PIP®

Regular Grade Gold Cowhide Leather Drivers Glove - Keystone Thumb

1BL18361

  • Top Grain Cowhide
  • Regular Grade
  • Gold Color
  • Keystone Thumb
  • Slip-On Cuff
  • Yellow Stitching
  • SIZES: S-XL
  • PACKED: 72 Pair/Case
  • STOCK TYPE: Stock
CUSTOM LOGO

We have a dedicated team that manages all of your logo requests and will help ensure the process runs smoothly from start to finish. If you have any questions along the way, they will be more than happy to assist you.

Experience the Difference

Cut Resistant Gloves

G-Tek®

Seamless Knit HPPE Blended Glove with Impact Protection and Sandy Nitrile Coated Palm & Fingers

1CF7006FTPR

  • Seamless Knit
  • 13 Gauge Hi-Vis Orange
  • Black Sandy Nitrile Grip
  • Palm & Fingertips
  • TPR Impact Protection
  • Knit Wrist
  • SIZES: M-3XL
  • PACKED: 72 Pair/Case
  • STOCK TYPE: Stock
ansi-A3
ANSI Cut Level: A3

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

4X44C

EN 388 2016 Results: 4X44CX

Abrasion: 4
Cut (Coupe Test): X
Tear: 4
Puncture: 4
Cut (TDM-100 Test): C
Impact Protection: X

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-3
ANSI Abrasion Level: 3

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

End of Life – Recyclable via Terracycle® Program

Whether it’s earplugs, gloves, safety eyewear or other recyclable PPE used in a manufacturing facility or jobsite, PIP®, in collaboration with TerraCycle® provides an easy and convenient way of collecting used PPE to help reduce the amount of waste that ends up in landfills. Contaminated PPE cannot be recycled. Learn more.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Cut Resistant Gloves

Knife Hawwk™

Seamless Knit Polykor Blended Glove with Foam Padded Palm and Sandy Nitrile Coated Palm & Fingers

1CF7007N

  • Seamless Knit
  • 13 Gauge Hi-Vis Yellow
  • Black Sandy Nitrile Grip
  • Palm & Fingertips
  • Foam Padded Palm
  • Knit Wrist
  • Touchscreen
  • SIZES: XS-2XL
  • PACKED: 72 Pair/Case
  • STOCK TYPE: Stock
ansi-A6
ANSI Cut Level: A6

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

3542

EN 388 2016 Results: 3542

Abrasion: 3
Cut (Coupe Test): 5
Tear: 4
Puncture: 2
Cut (TDM-100 Test):
Impact Protection:

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

End of Life – Recyclable via Terracycle® Program

Whether it’s earplugs, gloves, safety eyewear or other recyclable PPE used in a manufacturing facility or jobsite, PIP®, in collaboration with TerraCycle® provides an easy and convenient way of collecting used PPE to help reduce the amount of waste that ends up in landfills. Contaminated PPE cannot be recycled. Learn more.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Cut Resistant Gloves

G-Tek®

Seamless Knit PolyKor® Blended Glove with Hi-Vis Impact Protection and Double-Dip Nitrile MicroSurface Grip on Palm & Fingers

1CF7007NTPR

  • Seamless Knit
  • 13G Hi-Vis Yellow
  • Nitrile MicroSurface Grip
  • Double Dip
  • Padded Palm
  • Reinforced Thumb Crotch
  • L2 Hi-Vis Impact TPR
  • Knit Wrist
  • SIZES: S-2XL
  • PACKED: 72 Pair/Case
  • STOCK TYPE: Stock
ansi-A6
ANSI Cut Level: A6

Test Method: ASTM F2992-15

New edition ANSI/ISEA 105-2016 outlines a new test method for determining cut scores and a revised scale from A1-A9. Click here for more information about the new testing standard.

3X42F

EN 388 2016 Results: 3X42FP

Abrasion: 3
Cut (Coupe Test): X
Tear: 4
Puncture: 2
Cut (TDM-100 Test): F
Impact Protection: P

EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings. Click here for more information about the EN 388 2016 standard.

ansi-abrasion-4
ANSI Abrasion Level: 4

Test Method: ASTM D3389-10

The ANSI/ISEA 105-2016 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 test is used for coated gloves and the end point (failure) is the number of abrasion cycles it takes for the coating to wear through. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher ANSI Abrasion Level.

ansi-impact-2
ANSI Impact Level: 2

ANSI/ISEA 138 is a new, voluntary standard for the North American market designed to accurately classify different levels of impact protection offered by the impact-resistant gloves on the market. Click here for more information on our G-Tek Imapct Series.

End of Life – Recyclable via Terracycle® Program

Whether it’s earplugs, gloves, safety eyewear or other recyclable PPE used in a manufacturing facility or jobsite, PIP®, in collaboration with TerraCycle® provides an easy and convenient way of collecting used PPE to help reduce the amount of waste that ends up in landfills. Contaminated PPE cannot be recycled. Learn more.

Extended Life – Reusable/Launderable

Reusing or laundering products not only reduces cost, but also reduces the amount of waste that is put into our landfills in turn reducing the environmental impact.

Chemical Resistant

Chemguard+™

Lightweight Neoprene Coating with Cotton Knit Lining and 11" Long Pinked Cuff

1CN0034

  • Boss
  • Cotton Knit Lining
  • Neoprene Glove Sanitized Treated
  • SIZES: M-XL
  • PACKED: 72 Pair/Case
  • STOCK TYPE: Stock

AKLOPT

EN 374 Results: AKLOPT

A: Methanol
K: Sodium Hydroxide 40%
L: Sulfuric Acid 96%
O: Ammonium Hydroxide 25%
P: Hydrogen Peroxide 30%
T: Formaldehyde 37%


To attain the EN 374 pictogram shield gloves must pass at least a Level 2 in three chemicals. The chemicals listed above are the chemicals that passed for this glove.

SHOWING 1-36 OF 159 ITEMS
1 of 5
pin Rep Finder
Compare ()
Clear All Compare
Okay, Got it.
X

ORDER SAMPLE

X

GET FIELD TRIAL